One stroke teaches you to quickly install a new PTZ camera
There are many kinds of PTZ cameras. Next, I will share with you the installation methods and debugging methods of the most commonly used 24V ball-type built-in decoder PTZ cameras. I will teach you to install new PTZ cameras quickly.
1. Remove the lower cover of the gimbal and install the one machine with inch screws.
2, the PTZ decoding board red and black (mostly so) the line camera power supply, red is the positive black is negative.
3. Connect the zoom (Z) and public (c) labels on the PTZ decoding board, but do not need to focus (camera auto focus).
4, after connecting the PTZ will be outside the three lines, video (butt can use double-pass) power (AC 24v regardless of positive and negative) control (good a\b both positive and negative).
5. After all the network cable production is completed, the power is turned on to the ball machine. When you see the opportunity to self-check the ball (that is, you can turn it yourself), the camera installed will be completed.
6. In accordance with the PTZ instruction manual, set the address code and baud rate on the decoder board. The protocol decoder for the protocol can support it, without having to do other settings.
7. After changing the IP address of the dome camera first, add the DVR to adjust the parameters of the dome camera and the dome camera.
8, after the installation is completed, it is best to take the project Po test, normal transfer and then loaded on the wall.
Digital Weighing Indicator
Brief introduction:
XK3102SD Weighing Indicator is digital indicator and is mainly suitable for dynamic/static digital electronic Truck Scale.
Features:
It is simple for calibration and can make automatic and manual four-corner calibration;
It can be convenient for revising and view calibration parameters;
After Load Cell or indicator is changed, recalibration isn`t necessary;
It has error prompt and inspection function that are convenient for system maintenance;
It has dynamic weighing function and can display driving speed of truck;
It has one RS-485, one RS-232C, one 20mA current loop and one printer interface.
Digital Weight Indicator,Digital Weighing Indicator,Dynamic Truck Scale Weighing Indicator,Digital Railway Scale Weighing Indicator
SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com
