Calculation of ore consumption

If the amount of other raw materials in the sinter is determined (such as furnace dust, rolled steel, fuel, etc.), the ore consumption can be determined according to the material balance.
Aa'=P _p ′+D _d ′+M _m ′+Za′ (1)
Where A———the amount of sintered ore that is fired;
P, D, M———the amount of ore, furnace dust and rolled steel required for the production of unit sinter;
P', d', m' - - the content of the corresponding ore, furnace dust, rolling steel into the sinter, that is, the residual amount of each material;
Z———the amount of coke ash entering the sinter;
a'————relative to the amount of sinter, generally a'=1.0
Therefore, the consumption of ore

And d', m', a are correspondingly added - FeO _d ', m', a (see design example calculation example).
Example:
1000 kg sinter provided sinter dust into the furnace 200 kg, mill scale 30 kg, 80 kg of fuel, iron ore aqueous 5.0%, FeO0%. 6% aqueous dusts containing C4.0%, FeO10.0%, dry rolling FeO30.1%, dry fuel containing 12% ash. Ore consumption (excluding oxygen changes) .

The multifunction Busbar Processing Machine is the patented product developed by our company. Comparing with the traditional busbar processing machine, this product has the following advantages and features:

1. The punching unit adopts column structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;

2. The shearing unit adopts round integral structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;

3. The bending unit uses integral structure and CNC angle control mode, allowing easy operation and high accuracy;

4. This machine adopts the design approach of double-layer work bench, truly realizing the simultaneous working of three stations without mutual interference;

5. The machine is provided with an automatic oil charge and discharge system, easy to operate, with the hydraulic oil charged into the oil tank via a filter so as to protect the entire hydraulic system from contamination;

6. This machine is provided with stainless steel oil tank to protect the hydraulic oil from corrosive deterioration, and extend the service life of hydraulic oil and the seals;

7. Swappable dies offering extreme convenience;

8. PLC control that is stable and reliable.

Busbar Processing Machine

Cnc Punching Machine,Busbar Processing Machine,Steel Angle Punching Machine,High Speed Punching Machine

JINAN EURO-ASIA INT'L CO., LTD , https://www.eaelectricmachine.com