Titanium mineral
140 has been found more titanium dioxide titanium mineral content greater than 1%, but reserves and taste point of view, since only titanium and iron ore as well as the rutile mixed minerals leucoxene (weathered ilmenite product) With mining value, anatase (varietal of rutile), perovskite and vermiculite deposits have only a small economic value. Several major titanium minerals are listed in the table below.
Table Important Titanium Mineral Table
mineral | Chemical formula | TiO 2 theoretical content% | Density g∕cm 2 | hardness | colour |
Ilmenite | FeTiO 3 | 52.66 | 4.5 to 5.6 | 5~6 | Iron black to light brown black or Steel gray |
Rutile | TiO 2 | 100.00 | 4.5~5.2 | 6 to 6.5 | Light reddish brown, blood red, Light yellow, light blue, purple, Black color |
Anatase (octahcdrfte) | TiO 2 | 100.00 | 3.82~3.95 | 5.5~6 | Yellow, blue, black, etc. |
Slabite (broekite) | TiO 2 | 100.00 | 3.78~4.08 | 5.5~6 | Brown, light yellow, reddish, Light red brown, iron black, etc. |
White titanium (leucosphenite) | TiO 2 ·nH 2 O | ~94 | 3.5 to 4.5 | 4 to 5.5 | White, yellow, brown, etc. |
Perovskite | CaTiO 3 | 58.00 | 3.97~4.06 | 5.5 | Light yellow, reddish brown, Grayish black |
Tan石(titanite) | CatisiO 5 | 40.8 | 3.4 to 3.6 | 5 to 5.5 | Brown, gray, yellow, green, Purple and black, etc. |
Syringe Mould is a kind of plastic Medical Mould for disposable plastic syringe production. Syringe Mold includes syringe barrel mold, plunger mold and gasket mold. Our mold is usually made from S136, P20, 60# and Cr12 steel, and its material can also be customized.
Our mold is not only of pretty long working life, reaching 3 million shots, but also always of high precision to promise you high-quality syringes.
Mould Parameter:
Mould Life: 3,000,000 shots
Mould Cavity: Multiple cavities, can be customized
Runner Type: Cold runner, semi-hot runner
Mould Steel: Core and cavities: S136/Cr12/DC53
Base: 60#/5GrNiMo/4Cr13
(the mould steel can be customized as well)
Product Material: PP/PE
FAQ:
1. How about the delivery time?
About 100 days after your advance payment.
2. How about the payment terms?
Usually it is 30% advance payment before the production and balance payment 70% before the shipment by T/T. Flexible payment can be negotiable.
3. Can we visit your factory?
Sure. Your visit will be much welcomed at any time.
Syringe Mould
Syringe Mould,Syringe Mold,Syringe Needle Cap Mould,Disposable Syringe Mould
Yuhuan Zhengri Technology Co., Ltd. , http://www.syringemachine.com