Cable slide rail structure features and working principle
The product consists of flat cable, four-wheel trolley with carrying cable and guide rail. Flat cable uses non-flammable materials, can be used for indoor and outdoor and contact with oil pollution place, has a certain degree of weather resistance, and the round cable has a smaller bending radius, long life and other advantages. The track adopts cold-rolled steel plate once cold-drawn to ensure the accuracy of the rail cross-section size, which replaces the angle steel and other conductive methods unsafe and heavy. Indoor ash deposits, outdoor ice formation caused by short circuits, the impact of the use of the shortcomings, but also has the characteristics of domestic originality, the track unit length 4-6m coupler connector, can be extended to any length on demand.
The working principle of this product is shown in the engineering application diagram (1) The flat cable's feed end (connected to the field junction box) is fixed on the starter of the guide rail, and then according to the allowable operating space on the site. The appropriate length (1-2.5m) is fixed in sequence on the four-wheel trolley that carries the cable, and the cable end (power supply) is fixed on the last trolley (trailer). Through the reciprocating movement of the spring-pulled trolley on the cart, the drag of the cable (the length of the trolley exceeds 20rTl should consider the use of the traction rope, so that the cable is free from pulling force), which will drive all the trolleys to slide freely at any speed in the track, and the rails can be easily installed. , No adjustment, no contact with the power supply and other advantages, safe and reliable.
The working principle of this product is shown in the engineering application diagram (1) The flat cable's feed end (connected to the field junction box) is fixed on the starter of the guide rail, and then according to the allowable operating space on the site. The appropriate length (1-2.5m) is fixed in sequence on the four-wheel trolley that carries the cable, and the cable end (power supply) is fixed on the last trolley (trailer). Through the reciprocating movement of the spring-pulled trolley on the cart, the drag of the cable (the length of the trolley exceeds 20rTl should consider the use of the traction rope, so that the cable is free from pulling force), which will drive all the trolleys to slide freely at any speed in the track, and the rails can be easily installed. , No adjustment, no contact with the power supply and other advantages, safe and reliable.
Combine Harvester,Harvester Machine,Rice Harvester,Small Combine Harvester
Hunan Nongyou Machinery Group CO.,LTD , https://www.ricemill.nl