Prevention of small-scale mobile refuelling vehicles caught fire to protect you and me

When the small-scale mobile fuel tanker and tanker are in use, the most fearful thing is that the oil leaked and tilted during the installation and caused a fire. If there is a fire in the mobile refuelling vehicle, the result is very serious. How should small-scale mobile refuelling vehicles prevent fire accidents when they are used?

小型流动加油车

1. When a small mobile refuelling truck is parked in an oil depot, it must not be possible to use a short circuited fire to check some of the battery power of the vehicle. Because oil depots are often unventilated, and there are flammable items that contain tarpaulins, tires, etc., if sparks are generated at this time, it will ignite the air oil molecules in the oil depot. .


2. When doing fuel filter maintenance for a mobile refueling vehicle, do not use gas to burn the filter core. Some drivers do not know why, when they are driving gasoline filters, they prefer to use gasoline to burn the ceramic filter of the tanker. Come on, remove some of the impurities on the filter. This irresponsible approach is very dangerous and will not only result in a filter with a short life span, but also a relatively easy fire.

3, when the mobile refueling vehicle is operating in the crank or the engine, it is not possible to add gasoline to the carburetor mouth. Although it is said that the concentration of the mixer in the cylinder can be increased when adding gasoline to the carburetor of the small-sized mobile refueling vehicle, such a method is favorable for the start of the failure of the oil to enter the cylinder, but for other small-scale flow refueling. The breakdown of the car is without any help group. And this approach is also relatively easy to cause a fire accident.

4. The drag-and-drop subway chain of a mobile refueling vehicle cannot be wrapped around a girder. Because the oil and other substances transported by the vehicle are not the same, static electricity may be generated when rubbing against another object. In the event of a flashover, static electricity ignites the fuel and causes a fire and an explosion of a fuel truck.


300LB SORF  Flange
Our company mainly to the United States, Japan, Britain, Germany, the series of products.300LB SORF  Flange is neck flat-welding flange, pressure 300LB according to ANSI B16.5,and we produce ANSI,JIS, EN, DIN flanges. We grant our buyers with our strict quality control system and good serivce.

300LB SORF Flange

300Lb Sorf Flange,300Lb A105 Sorf Flange,Ansi B16.5 300Lb Sorf Flanges

Jinan HeChuang Mechanical Manufacturing Co., Ltd. , http://www.hechuangmechanical.com