Seaflo 4.5gpm 40psi 230V AC Mini Water Pump
Application:
Agriculture/Yacht / RV/Caravan pressurized water system
Sprayer fixture (Vehicle-mounted sprayer, electric sprayer)
Food beverage filling & liquid transfer
Any other pressurization system
How a Diaphragm Pump Works
The pump is driven by an AC or DC motor
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber
Has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
| Â Â Housings: | Â Polypropylene |
| Â Â Valves: | Â Viton/EPDM |
| Â Â Diaphragm: | Â Santoprene |
| Â Â Fasteners: | Â Stainless Steel |
| Â Â Motor Shell: | Â Coated Steel |
| Motor Voltage | 12/24V DC |
| Type | 4 chamber diaphragm pump, self priming, capable of being run dry |
| Mode | Demand |
| Certifications Option | CE Approval |
| Liquid Temperature | 140°F (60°C) Max. |
| Priming Capabilities | 6 Feet (1.8 m) |
| Max Pressure | 40psi (2.8bar) |
| Max Flow rate | 17lpm (4.5gpm) |
| Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb |
| 1/2 NPT thread filter for your choice. | |
| Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
| Motor options | 2 pin connector |
| On/off switch |
| STANDARD PUMP CONFIGURATIONS | |||||||||
| Model | Switch | GPM/LPM | PSI/BAR | Max Draw(A) | Valves | Diaphragm | Ports | Voltage | Wire Connections |
| SFDPA1-045-040-41 | Demand | 4.5/17.0 | 35/2.4 | 1.7 | Viton | Santoprene | Quick Attach | 12V | 2-Pin/Leads |
| SFDPA2-045-040-41 | Demand | 4.5/17.0 | 35/2.4 | 0.9 | Viton | Santoprene | Quick Attach | 24V | 2-Pin/Leads |
| SFDP1-045-040-41 | Demand | 4.5/17.0 | 40/2.8 | 15 | Viton | Santoprene | Quick Attach | 12V | 2-Pin/Leads |
| SFDP2-045-040-41 | Demand | 4.5/17.0 | 40/2.8 | 6 | Viton | Santoprene | Quick Attach | 24V | 2-Pin/Leads |
| Consult factory for other available models | |||||||||
SHINPPING INFORMATION
 Â | |
Unit Pump Weight |
2.43Â kg |
Selling Unit Size (L x W x H) |
35.0 x 13.0 x 11.0 cm |
Selling Unit Weight |
2.72Â kg |
Master Carton Size (L x W x H) |
67.0 x 32.5 x 25.5 cm |
Master Carton Qty |
10 |
Master Carton Weight |
28.1Â kg |
FAQ
 1. What is your MOQ?
100 pieces in general, but we also sale about 10--50 pieces for new costumers for their sample testing.
2. What about the delivery time?
It depends on your order quantity; it usually takes 15-25days upon receipt of your 30% deposit by T/T.
Sample can be delivered within 7days.
3. Can I buy different types in one container?
Yes, you can mix different types in one container.
4. Do you have oversea agents?
1. Of course. We have many agents overseas, such as Dacon Europe A/S in Denmark, A P Lifting Gear Company LTD in United Kingdom, SEAFLO MARINE & RV NORTH AMERICA, LLC in United States, Bin Alshaikh Abobaker for Treading in Yemen, Williams Industrial Products Pty Ltd/Marine Systems Australia and SEAFLO AUS pty in Australia, Azzi Sport Marine S.A.R.L in Lebanon, SARAY DENIZ MALZEMELERI YATCILIK SAN.TIC.LTD.STI in Turkey, RECAMBIOS MARINOS S.L in Spain, DINO CO.,LTD in South Korea.
2. Welcome oversea agents!
5.Do you accept OEM/ODM
Yes. We are also the OEM supplier of many famous companies, such as WALMAT.
6. What is your terms of payment.
T/T, 30% in advance, balance against B/L copy.
7. What is your warranty?
5 years, and within 24 hours reply will be provided to solve customers' problems.
8. What is your port of loading?
Fuzhou & Xiamen Port.
Water Irrigation Pump SEAFLO 4.5GPM 40PSI 12v DC Mini Solar PumpApplication:
Agriculture/Yacht / RV/Caravan pressurized water system
Sprayer fixture (Vehicle-mounted sprayer, electric sprayer)
Food beverage filling & liquid transfer
Any other pressurization system
How a Diaphragm Pump Works
The pump is driven by an AC or DC motor
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber
Has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
| Â Â Housings: | Â Polypropylene |
| Â Â Valves: | Â Viton/EPDM |
| Â Â Diaphragm: | Â Santoprene |
| Â Â Fasteners: | Â Stainless Steel |
| Â Â Motor Shell: | Â Coated Steel |
| Motor Voltage | 12/24V DC |
| Type | 4 chamber diaphragm pump, self priming, capable of being run dry |
| Mode | Demand |
| Certifications Option | CE Approval |
| Liquid Temperature | 140°F (60°C) Max. |
| Priming Capabilities | 6 Feet (1.8 m) |
| Max Pressure | 40psi (2.8bar) |
| Max Flow rate | 17lpm (4.5gpm) |
| Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb |
| 1/2 NPT thread filter for your choice. | |
| Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
| Motor options | 2 pin connector |
| On/off switch |
| STANDARD PUMP CONFIGURATIONS | |||||||||
| Model | Switch | GPM/LPM | PSI/BAR | Max Draw(A) | Valves | Diaphragm | Ports | Voltage | Wire Connections |
| SFDPA1-045-040-41 | Demand | 4.5/17.0 | 35/2.4 | 1.7 | Viton | Santoprene | Quick Attach | 12V | 2-Pin/Leads |
| SFDPA2-045-040-41 | Demand | 4.5/17.0 | 35/2.4 | 0.9 | Viton | Santoprene | Quick Attach | 24V | 2-Pin/Leads |
| SFDP1-045-040-41 | Demand | 4.5/17.0 | 40/2.8 | 15 | Viton | Santoprene | Quick Attach | 12V | 2-Pin/Leads |
| SFDP2-045-040-41 | Demand | 4.5/17.0 | 40/2.8 | 6 | Viton | Santoprene | Quick Attach | 24V | 2-Pin/Leads |
| Consult factory for other available models | |||||||||
SHINPPING INFORMATION
|
 | |
Unit Pump Weight |
2.43Â kg |
Selling Unit Size (L x W x H) |
35.0 x 13.0 x 11.0 cm |
Selling Unit Weight |
2.72Â kg |
Master Carton Size (L x W x H) |
67.0 x 32.5 x 25.5 cm |
Master Carton Qty |
10 |
Master Carton Weight |
28.1Â kg |
FAQ
 1. What is your MOQ?
100 pieces in general, but we also sale about 10--50 pieces for new costumers for their sample testing.
2. What about the delivery time?
It depends on your order quantity; it usually takes 15-25days upon receipt of your 30% deposit by T/T.
Sample can be delivered within 7days.
3. Can I buy different types in one container?
Yes, you can mix different types in one container.
4. Do you have oversea agents?
1. Of course. We have many agents overseas, such as Dacon Europe A/S in Denmark, A P Lifting Gear Company LTD in United Kingdom, SEAFLO MARINE & RV NORTH AMERICA, LLC in United States, Bin Alshaikh Abobaker for Treading in Yemen, Williams Industrial Products Pty Ltd/Marine Systems Australia and SEAFLO AUS pty in Australia, Azzi Sport Marine S.A.R.L in Lebanon, SARAY DENIZ MALZEMELERI YATCILIK SAN.TIC.LTD.STI in Turkey, RECAMBIOS MARINOS S.L in Spain, DINO CO.,LTD in South Korea.
2. Welcome oversea agents!
5.Do you accept OEM/ODM
Yes. We are also the OEM supplier of many famous companies, such as WALMAT.
6. What is your terms of payment.
T/T, 30% in advance, balance against B/L copy.
7. What is your warranty?
5 years, and within 24 hours reply will be provided to solve customers' problems.
8. What is your port of loading?
Fuzhou & Xiamen Port.
Valve Spare Parts including body, bonnet, yoke, disc, seat, ball, retainer, stem, flanges, packing, bolt, nuts ect. Our factory specialized in providing forged steel spare parts in raw materil, semi-finished or finished manching. The forged materil we manufactured like A105, LF2, F11, F22, F91, F92, F53, 12Cr1MoV etc. Valve spare parts material pressure ranging from ANSI classes 150 to classes 4500. The sizes of valve spare parts according to the requirements of the custmer. Our factory valve spare parts serviced numbers of state-owned EPC contractor, valve factory or project owner, even exported to Europen, USA in last five years.
Valve Spare Parts
Valve Spare Parts,Float Ball Valve Spare Parts,Gate Valve Spare Parts,Ball Valve Spare Parts
Yongjia South Trading Co.,Ltd , http://www.n-lvalve.com