Hydraulic Hose Fitting Hydraulic Pneumatic Brass Fitting Tube Fitting

Boer Electrical supplies pneumatic elements for more than 10 years in China. By produced under the advanced production line and testing equipment, powerful technical strength, and scientific and strict quality control under certification of ISO9001 Quality Management System,pneumatic components, Hydraulics Pneumatics & Seals Association from Boer electrical are very popular among customers from home and abroad, which are widely applied to machinery, metallurgy, food packing, medicine, electronic, etc.
Why quick connectors?
1, time-saving: through the quick connector to split off and connecting passage, simple operation, saving time and manpower.
2, fuel-efficient: break the oil, the quick connector on the single valve can be closed oil, oil will not flow out to avoid oil pressure loss
3, environmental protection: quick connector break and connection, the oil will not spill, protect the environment.
4, the equipment into a zero, easy to transport: large equipment or need to carry the hydraulic tools, the use of quick connector after the separation of transport, to reach the destination and then assembled.
5, the economy: the above advantages for customers to create the economic value.
Quick Coupler Features:
• Quick installation, simple and smart, space saving;
• Variety of styles to meet the needs of any pneumatic pipe;
• Even after installation, the plastic body can be turned freely;
• Release ring with elliptical design, easy to remove more convenient;
• All taper pipe thread pre-coated PTFE leakproof adhesive, good sealing performance.
Take over the note:
(1) to confirm the pipe cut surface perpendicular to the tube outside the scars and the tube is not oval.
(2) plug the tube must be inserted into the bottom of the joint, the tube is not inserted in the end may lead to leakage.
(3) after the tube is installed, to pull the tube to confirm the tube pulled out
When the wood unloading Note:
(4) Use the appropriate tool to remove the pipe fitting using the hexagonal part of the pipe fitting
(5) to remove the sealing material with the pipe joints with the opposite side of the sealing material. Otherwise the adhesive material may adhere to the surrounding components, resulting in failure
What is the function of pneumatic?
The purpose of the compressed air is extremely broad, from the measurement of human eye with low pressure air inside the liquid pressure, mechanical hand a variety of linear and rotary motion through special processing machines, pneumatic press and the application of pneumatic drill, Pneumatic air cylinder quick connect wire connectors,etc.
Below with a brief list and a list of instructions, the control of pneumatic widely adaptability and diversity, continuous popularization and application in industry production.
For air, water and chemical control of the valve in the system
Heavy doors or hot door opened and closed
In the construction, steel, mining and chemical industry factory material discharging door
Manipulation of the shearing machine
In the flat steel ingot mold machine and mobile
The filling machine
Pneumatic cylinder applications connectors fittings
Pneumatic control system components quick connectors
Pneumatic compression air compressor couplers and fittings
Crop planting from manipulation of the tractor and other agencies
Drive and feed cutting machine
Pneumatic pressure connectors for industrial application
Hydraulic and pneumatic Fittings for power systems
Automatic smc pneumatic cylinder system smc connector    
Fixed and movement in logging and furniture manufacturing
Test equipment of machine tool, workpiece and tool feed
In the assembly machinery and machine tool clamping device and fixed clamp
Delivery of parts and materials
For plastic bonding, sealing and welding fixed
Brazing of fixed
Pneumatic hydraulic pump high pressure fitting
Pneumatics tools suppliers pneumatic hose connectors
Pneumatic and hydraulic quick connector hose fittings
Pneumatic tube connectors Straight type Made in China
High temperature pneumatic tubing Connect Fittings
Spot welding machine
Compressor air hose fittings parts pneumatic connector
Spray paint
Male Y Type fitting Pneumatic Quick Connectors
High Performance air hose adapter fittings
High Performance air compressor fittings quick connector
riveting
Pneumatic robot
Pneumatic Air Water Connector Quick Threaded Plastic Pipe Fitting
Automatic measurement
Bending tensile peace manipulation of the machine
The characteristics of compressed air

The so-called aligning bearing is that the raceway raceway is spherical, and it can adapt to the angular displacement between the two raceways, which is mainly supported by radial load, and can also bear a small number of two-way axial loads.
Characteristics of core bearing
It is mainly subjected to radial load, and it can also bear a small amount of bidirectional axial load.

Tune ball bearing editing
The center ball bearing is the inner ring of the two raceways and the outer ring of the raceway for the spherical surface, and the ball bearing is assembled with a ball shaped roller. It can bear a large radial load and also bear a certain axial load, as shown in Figure 1. The outer raceway of this kind of bearing is spherical, so it has the performance of adjusting center.
The main features of the ball bearing are as follows:
(1) the outer race raceway of the ball aligning ball bearing is a part of the sphere. The center of curvature is on the bearing axis. Therefore, the bearing has the function of adjusting the center, and it can be automatically adjusted when the shaft and shell appear flexure, and does not increase the bearing burden.
(2) an appropriate amount of axial load that can bear radial load and two directions. But it can't bear the torque load.
This kind of bearing has smaller contact angle, almost no contact angle under axial load, small axial load capacity, large radial load capacity, and suitable for heavy load and impact load.
(3) the double row center ball bearing with tightened and locking nuts can be installed at any position on the optical axis and does not need to be positioned on the shoulder.

Spherical Roller Bearings
Spherical Roller Bearing is in the two groove of the inner ring and outer ring raceways between Spherical Bearing assembly, a drum shaped roller, as shown in figure 3. Spherical Roller Bearing with two rollers, mainly bear radial load, also can withstand any direction of the amount of axial load; radial load capacity is very high, especially suitable for radial heavy loads or vibration, but unable to bear pure axial load.
The main characteristics of the spherical roller bearing:
(1) bearing with self-aligning ball like outer ring spherical roller bearing raceway is a part of spherical surface, the curvature center on the bearing axis, the bearing outer ring raceway is spherical shape, so its self-aligning performance is good, can compensate concentricity error, thus can realize the automatic aligning.
(2) in the section perpendicular to the rolling direction, the roller busbar is a curve, which fits well with the inside and outside raceway. The roller and raceway are linear contacts, which can bear radial load and axial load, and has good impact resistance.
(3) roller and roller bearing raceway match well, and are therefore relatively serious curve generatrix, sliding, friction than cylindrical roller bearings, spherical roller bearings are allowed so low working speed.
(4) the heart fades with a normal roller bearing non symmetrical roller, it will generate an axial force, roller by the force and the center fixed flange contact, spherical roller bearing symmetrical roller, it can move along the axial direction using the middle movable baffle ring, so no longer block roller center the edge of the constraints, and saves the recess of the inner raceway, the roller can be used longer, so as to improve the bearing capacity.
(5) single row self-aligning roller bearing contact angle is 0. Under axial load, the contact angle did not change significantly, the axial load will be very small contact forces generated great between roller and raceway, so when the axial load is greater than the radial load, the loads of single row spherical roller bearing can bear radial and axial.
(6) bearing with self-aligning ball like set with tight double row spherical roller bearing can be installed in any position on the optical axis, do not need to process the positioning shaft shoulder.

Spherical Plain Bearing

Spherical Plain Bearing,Cheap Spherical Plain Bearing,High Precision Spherical Plain Bearing,Radial Spherical Plain Bearings

LUOYANG AUTO BEARING CO.,LTD , https://www.ballbearing.nl