12-Volt Cigarette Lighter Power Supply Adapter

12-Volt Cigarette Lighter Power supply adapter 

Power up your 12-Volt device from Car lighter slot
Universal Use For Monitor / Camera / CCTV / LED
Coiled cord with 50cm long and with more than 95cm
Build-in replaceable 3 Amp fuse to protect car
For 5v 12v . automobile device


Our Service
1. Reply your enquiry in 24 working hours
2. Experienced staffs answer all your questions in fluent English
3.Customized design is available .
4.Exclusive and unique solution can be provided to our customer by our well-trained and professional and staffs
5. Special discount and protection of sales area provided to our distributor

12-Volt Cigarette Lighter Power supply adapter 

Power up your 12-Volt device from Car lighter slot
Universal Use For Monitor / Camera / CCTV / LED
Coiled cord with 50cm long and with more than 95cm
Build-in replaceable 3 Amp fuse to protect car
For 5v 12v . automobile device


Our Service
1. Reply your enquiry in 24 working hours
2. Experienced staffs answer all your questions in fluent English
3.Customized design is available .
4.Exclusive and unique solution can be provided to our customer by our well-trained and professional and staffs
5. Special discount and protection of sales area provided to our distributor

Gantry crane bridge crane is a kind of deformation, also called gantry crane. Mainly used in Outdoor Yard, loading and unloading of goods, the bulk of the field. Its metal structure as a door shaped frame, bearing girder installation of two legs can be directly in the ground track walk, at both ends of a main beam can with cantilever beam. Gantry crane has the space utilization rate is high, and large working range, adapt to wide, general characteristics, widely used in port yard.

Photo of our Gantry:

Formal classification

Gantry crane can be according to the structure of the door frame, according to the main beam form, according to the main beam structure, according to the use of the form of classification.

Door frame structure

Door type crane and cantilever gantry crane

Portal crane

1. the whole gantry crane: the main beam without suspension, the car in the main span of the;

2. half gantry crane: the legs are high or low, can be used in accordance with the requirements of the use of the site.

Cantilever gantry crane

1. double cantilever gantry crane: the most common form of structure, the structure of the force and the effective use of the site area are reasonable.

2. single cantilever gantry crane: the structure of the form is often due to the restrictions of the site was chosen. 

Main beam form

1. single girder

Single girder gantry crane has the advantages of simple structure, convenient manufacture and installation, its quality is small, the partial rail box frame structure. Compared with the double girder gantry crane, the overall stiffness is weaker. Therefore, when the weight is Q = 50t, S = 35m span, can use this form. L type and C type two forms of single girder gantry crane legs. L type of manufacture and installation is convenient, the situation is good, its own quality is small, however, the lifting of cargo through the supporting legs of the space is relatively small number of. The C shaped support legs are bent or bent, and the purpose is to have a larger transverse space so as to enable the goods to pass through the supporting legs.

2. double girder

Strong ability of bearing double girder gantry crane, span is big, the overall stability is good, many varieties, but its quality with the same play weight of single girder gantry crane compared to larger, the construction cost is also high. According to the different structure of the main beam, it can be divided into two types of box girder and truss. Generally use box structure. [1]

Main beam structure

1. truss beam

Structure using I-steel welded together, has the advantages of low cost, light weight, good wind resistance. However, due to the defects of the welding point and the truss, the truss beam has large deflection, small rigidity, low reliability, and so on. Applicable to the safety requirements of the lower, the smaller the weight of the site.

2. Box Girder

The use of welded steel box type structure, has the advantages of high safety, rigidity etc.. Generally used for large tonnage and large tonnage gantry crane. Such as the MGhz1200, the weight of 1200 tons, is the largest gantry crane, main girder with box girder structure. At the same time, the box beam has the disadvantages of high cost, great self important, poor wind resistance and so on.

3. cellular beam

Generally refers to the isosceles triangle honeycomb beam, the beam end is a triangle, on both sides of the diagonal with honeycomb holes, the upper part and the lower part of a chord. The cellular beam absorbs the characteristics of the truss beam and box girder, which has larger stiffness, smaller deflection and higher reliability than the truss beam. But because of the use of steel plate welding, the weight and cost ratio of truss beam Shaogao. Suitable for use in frequent or high weight field or beam field. Because of this type of beam type for patent products, so manufacturers less.

Use form

1. ordinary Longmen crane

This kind of crane adopts box type and truss structure, the most widely used. Can carry a variety of pieces of goods and bulk materials, the weight of 100 tons, the span of 4 to 39 meters. With ordinary high-level gantry crane Grab. General gantry crane is mainly refers to the hook, grab, electromagnetic, gourd gantry crane, which also includes semi gantry crane.

2. hydropower station Longmen crane

Mainly used for lifting and opening and closing the gate, but also to carry out the installation work. Up from 80 to 500 tons, the span is smaller, is 8 to 16 meters; the lifting speed is low, for 1 ~ 5 m / min. Although this crane is not a regular crane, but once the use of the work is very heavy, so to increase the level of work properly.

3. shipbuilding Longmen crane

Ship to berth assembly, standing with two lifting trolley: A has two main hook, running on a bridge on the flange of the track on; and another has a main hook and a pair of hook, run on the flange of the rail of the bridge to turn and lifting of large hull block. Lifting weight is generally 100 to 1500 tons; span of 185 meters; lifting speed of 2 ~ 15 m / min, and 0.1 to 0.5 m / min of the micro motion speed.

4. container crane in Longmen

For container terminals. Trailer bridge to quay container carrying containers unloaded from the ship

Transported to the yard or rear, carried away by the container gantry crane duima up or direct loading, accelerate the turnover of the bridge or other crane container carrying. Can be stacked high 3 to 4 layers, 6 rows of the container yard, the general use of the tire type, but also useful. Compared with the container truck, Longmen crane span and the height of both sides of the gantry are larger. In order to meet the need of the transportation of the port and wharf, the working level of this kind of crane is higher. From the lifting speed is 8 ~ 10 m / points; span across the container as needed to determine the number of rows, up to a maximum of 60 meters corresponding to 20 feet, 30 feet, 40 feet container weight were approximately 20 tons, 25 tons and 30 tons.

Gantry

Boat Gantry,Lifting Gantry,Overhead Gantry,Aluminum Gantry

Unisite Group Ltd. , https://www.shipsparts.nl