304/316/410 Stainless Steel Hex Flange Head Self-Drilling Metal Screw
The hex flange head self-drilling metal screws are made of stainless steel and have a sheet metal thread with a self-drilling cutting  point to pierce through metal steel, aluminium, wood etc., including structural steel.
The higher the TEK number the larger the drilling point to pierce heavier gauge metals. Different stainless mode for different applications.
Hex head self drilling sheet metal screws are installed with a wrench or hex nut setter.
Specification
Â
| Type | Self-drilling Screw /Tek Screw |
| Grade | SUS304, 18-8, SUS316(Marine Grade), SUS410(Martensite) |
| Head Type | Hex Flange Head |
| Drive Type | Exterior Hex |
| Point Type | #2, #3, #4, #5, #6, #7 Tek Point |
| Diameter | #6 ~Â 1/4", 3.5 ~Â 6.3mm |
| Length | 1/4" ~Â 10", 6.5 ~Â 250mm |
| Standard | DIN, ANSI, JIS, IFI |
| Stock | Unavailable |
Contact
If you're insterested in our stainless steel hex flange head self-drilling metal screw, please do not hesitate to send us an email or call us at +8615867456779(Mobile)directly.
For stock, we suggest you double check from us before placing order, thank you!
 304/316/410 Stainless Steel Hex Flange Head Self-drilling Metal Screw
The hex flange head self-drilling metal screws are made of stainless steel and have a sheet metal thread with a self-drilling cutting  point to pierce through metal steel, aluminium, wood etc., including structural steel.
The higher the TEK number the larger the drilling point to pierce heavier gauge metals. Different stainless mode for different applications.
Hex head self drilling sheet metal screws are installed with a wrench or hex nut setter.
Specification
Â
| Type | Self-drilling Screw /Tek Screw |
| Grade | SUS304, 18-8, SUS316(Marine Grade), SUS410(Martensite) |
| Head Type | Hex Flange Head |
| Drive Type | Exterior Hex |
| Point Type | #2, #3, #4, #5, #6, #7 Tek Point |
| Diameter | #6 ~Â 1/4", 3.5 ~Â 6.3mm |
| Length | 1/4" ~Â 10", 6.5 ~Â 250mm |
| Standard | DIN, ANSI, JIS, IFI |
| Stock | Unavailable |
Contact
If you're insterested in our stainless steel hex flange head self-drilling metal screw, please do not hesitate to send us an email or call us at +8615867456779(Mobile)directly.
For stock, we suggest you double check from us before placing order, thank you!
Â
Our company was set up in 2002.We are using the advanced cold punch technology to produce spark plug which is similar to NGK and Champion technology.With such technology, the metal shell and ceramic are better protected the quality of the spark plug are more stable to get avoid from air leaking and broken.Our spark plug products are ranged into more than 100 models with an anual out put of 6 million pcs. Besides the advanced technology,we also have a strong advantage of automatical production.Most of our production device is automatical that we have very high,efficiency and stable quality.Throughout such years of developing,we have gained a good reputation at domestic motorcycle manufacturer.Furthermore,our products have been exported to South East Asia, Middle East, Australia and so on. Revolution,refine and devotion are our principal of working.Welcome to visit us and raise your demand and your comments request are our target to strive.
Spark Plug A7Tc,Changing Spark Plugs,Automotive Spark Plugs,Auto Normal Spark Plug
LIXIN INDUSTRIAL & TRADE CO.,Limited , https://www.kgvsparkplug.com