Car Radiator Blow Moulding Machine

Model NO.: FSC80
Energy Saving System: Yes
Automatic Degree: Fully Automatic Extrusion
Application: Car Radiator, Auto Parts, Cans,Barrel
Condition: New
Screw Diameter: 80mm
Max Capacity Size: 30L
Raw Material Used: HDPE, PE, ABS
Place of Origin: Jiangsu, China
Diemension: 5.8*2.8*4.6
Trademark: FORSTEC
Specification: ISO9001
Origin: Jiangsu, China
HS Code: 8477401000
Model NO.: FSC80
Energy Saving System: Yes
Automatic Degree: Fully Automatic Extrusion
Application: Car Radiator, Auto Parts, Cans,Barrel
Condition: New
Screw Diameter: 80mm
Max Capacity Size: 30L
Raw Material Used: HDPE, PE, ABS
Place of Origin: Jiangsu, China
Diemension: 5.8*2.8*4.6
Trademark: FORSTEC
Specification: ISO9001
Origin: Jiangsu, China
HS Code: 8477401000
Car Radiator Blow Moulding Machine/Jerrycan Extrusion Machine(FSC80):
1). blow molding machine experience of the engineer for more than 12 years
2). Machine produce the max for 30L jerrycan
3). The capacity is about 30PCS/h.
4). The famous imported components for machine
5). Taiwan Yuken hydraulic valve for stable working
6). The deflashing system can be equiped according to customer's request.

2. Main characteristics of Car Radiator Blow Moulding Machine:
1). Accumulator head, single layer, the capacity is up to 2 layer 120L jerrycan, drum.
2). It process the material as HDPE, PP, ABS and etc.
3). Power supply: 380VAC, 50Hz (depending on client's county ).
4). The machine is mainly composed of extrusion system, die head system, clamping system, hydraulic system and electrical systems.

General information for this Car Radiator Blow Moulding Machine:
Extrusion system: Screw: Specially designed based on material's trait, High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2. Barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2.
Die head system: Accumulator die head, single cylinder, central injection, vertical fist in first out design, accumulator channel slick; Slip parts like injection piston and cylinder made with different material and technique, work balanced and reliable.
Clamping system: Fixed clamping system, double diagonal tie bar single cylinder central clamping, wider space for the mould, install and dismantle the mould easily, linear roll guide rail.
Hydraulic system: Adopted proportional pressure controlling, with hydraulic valve and pump of Taiwan Yuken, balanced and accurate action, prolonged useful life, sensitive response.
Electrical system: Adopt PLC to control the action program of the whole machine; Adopt touch screen for communication, parameter setting, modification and picture display; Every parameter could be set and modified directly with the complete obstacle self-diagnosing function, menu operated directly and conveniently.

3. Advantages of this Car Radiator Blow Moulding Machine:
1). Adopt energy-saving system which can increase the 20% efficiency.
2). The capacity is about 30PCS/h which is15% higher than some others.
3). Power consumption is about 15% lower.
4). All process are well computerized which makes the operation more conenient.
5). Imported hydraulic components which gurantee the stable working for long time.

4. Products produced by this Car Radiator Blow Moulding Machine:
extruder
1 Screw diameter 80mm

2 L/D ratio 24:1

3 Screw speed 50-90r.p.m.

4 Drive motor AC45Kw  3 Phase asynchronism motor


5 Inveting drive America Amerson


6 Heating zone with cooling fan 5 zones


7 Output/Throughout 170Kg/hr(HDPE  particle)


8 Heating capacity 5X5.02 (=25.1) kw

9 Vertical adjustment of head 450mm

10 Forward/Backward adjustment of head 600mm

11 Groove feed barrel cylinder No


12 Gear box Hard gear decelerator


13 Ladder and safety rails fixed




DIE HEAD
1 Accumulator capacity 5L(3.5kgHDPE)


2 Design First in and first out


3 Heating zone 5 zones


4 Heating capacity 26kw

5 Max die diameter 450mm

6 Die head axis with pre-blow 100mm

7 Accumulator push-out stroke measurement Transducer  Italy Gefran


8 Injection pressure 12Mpa

9 Extruder stop Have



CLAMPING UNIT
1 Tie bar Two tie bar


2 Platen size 1260(W)X1020(H)

3 thickness of mold 465-600mm

4 Clamping force 410KN

5 Close/Open stroke 450-1250mm

6 size of mold 780×1260mm

7 Clamping stroke measurement Proximal sensor TAIWAN RIKO


8 Hydraulic valve YUKEN

YUKEN
9 Number of hydraulic cylinder 1

10 High pressure 14mpa

11 Support parts for platen movement Guide


Car Radiator Blow Moulding Machine/Jerrycan Extrusion Machine(FSC80):
1). blow molding machine experience of the engineer for more than 12 years
2). Machine produce the max for 30L jerrycan
3). The capacity is about 30PCS/h.
4). The famous imported components for machine
5). Taiwan Yuken hydraulic valve for stable working
6). The deflashing system can be equiped according to customer's request.

2. Main characteristics of Car Radiator Blow Moulding Machine:
1). Accumulator head, single layer, the capacity is up to 2 layer 120L jerrycan, drum.
2). It process the material as HDPE, PP, ABS and etc.
3). Power supply: 380VAC, 50Hz (depending on client's county ).
4). The machine is mainly composed of extrusion system, die head system, clamping system, hydraulic system and electrical systems.

General information for this Car Radiator Blow Moulding Machine:
Extrusion system: Screw: Specially designed based on material's trait, High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2. Barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2.
Die head system: Accumulator die head, single cylinder, central injection, vertical fist in first out design, accumulator channel slick; Slip parts like injection piston and cylinder made with different material and technique, work balanced and reliable.
Clamping system: Fixed clamping system, double diagonal tie bar single cylinder central clamping, wider space for the mould, install and dismantle the mould easily, linear roll guide rail.
Hydraulic system: Adopted proportional pressure controlling, with hydraulic valve and pump of Taiwan Yuken, balanced and accurate action, prolonged useful life, sensitive response.
Electrical system: Adopt PLC to control the action program of the whole machine; Adopt touch screen for communication, parameter setting, modification and picture display; Every parameter could be set and modified directly with the complete obstacle self-diagnosing function, menu operated directly and conveniently.

3. Advantages of this Car Radiator Blow Moulding Machine:
1). Adopt energy-saving system which can increase the 20% efficiency.
2). The capacity is about 30PCS/h which is15% higher than some others.
3). Power consumption is about 15% lower.
4). All process are well computerized which makes the operation more conenient.
5). Imported hydraulic components which gurantee the stable working for long time.

4. Products produced by this Car Radiator Blow Moulding Machine:
extruder
1 Screw diameter 80mm

2 L/D ratio 24:1

3 Screw speed 50-90r.p.m.

4 Drive motor AC45Kw  3 Phase asynchronism motor


5 Inveting drive America Amerson


6 Heating zone with cooling fan 5 zones


7 Output/Throughout 170Kg/hr(HDPE  particle)


8 Heating capacity 5X5.02 (=25.1) kw

9 Vertical adjustment of head 450mm

10 Forward/Backward adjustment of head 600mm

11 Groove feed barrel cylinder No


12 Gear box Hard gear decelerator


13 Ladder and safety rails fixed




DIE HEAD
1 Accumulator capacity 5L(3.5kgHDPE)


2 Design First in and first out


3 Heating zone 5 zones


4 Heating capacity 26kw

5 Max die diameter 450mm

6 Die head axis with pre-blow 100mm

7 Accumulator push-out stroke measurement Transducer  Italy Gefran


8 Injection pressure 12Mpa

9 Extruder stop Have



CLAMPING UNIT
1 Tie bar Two tie bar


2 Platen size 1260(W)X1020(H)

3 thickness of mold 465-600mm

4 Clamping force 410KN

5 Close/Open stroke 450-1250mm

6 size of mold 780×1260mm

7 Clamping stroke measurement Proximal sensor TAIWAN RIKO


8 Hydraulic valve YUKEN

YUKEN
9 Number of hydraulic cylinder 1

10 High pressure 14mpa

11 Support parts for platen movement Guide


Aluminum Laser Cutting Parts

(1) It is used as a variety of industrial metal parts that like electronic component, auto spare parts, 

home appliance, industrial equipment...etc. Material grade are:  aluminum alloy5052, 6063, 6061.

(2) Software for specification drawings: Pro/E, Auto CAD, PDF, IGES/IGS, STP/STEPS, X_T, DXF etc..

(3) High precision as following: Aluminum alloy: 1mm~8mm

Accuracy: positioning accuracy: ±0.03mm, Repeated positioning accuracy: ±0.02mm

(4) Main poduction machine: Laser Cutting Machine, CNC punching machine, welder, CNC bending machine

(5) Surface treatment: Polishing, grinding, gavanized, powder coating, nickel, zinc, chrome, silver, gold plating etc.

(6) For packing: A variety of packing methods can be used according to customers' requirement, such as carton , wood box, wood crate and pallet etc.

Aluminum Laser Cutting

Aluminum Laser Cutting,Steel Laser Cutting Machine,Sheet Metal Laser Cutting Machine,Custom Aluminum Laser Cutting

Nanpi Jian Tong Hardware Manufacturing Co., Ltd. , https://www.jiantongstamping.com