Plastic Cascade Mini-Rings (CMR) Random Packing
Plastic Cascade Mini Ring is a made of heat resistant & corrosion resistant plastics such as PE, PP, RPP, PVC, CPVC and PVDF. As industry standard  well-known random packing, it has characteristics of :
• Low aspect ratio increases capacity and reduces pressure drop. The preferred vertical orientation of the packing axes allows free gas flow through the packed bed.Â
• Low pressure drop and high capacity allows smaller column diameter and blower sizes in new installations.Â
• Open structure and preferred vertical axis orientation inhibits fouling by allowing solids to be more easily flushed through the bed by the liquid.Â
• Ring and spoke construction and preferred vertical orientation provide high mechanical strength, which allows use in deep beds.
Typical Applications
Absorption, Stripping Towers, with many other environmental protection applications.
Typical Specification
| Type | Dimension/mm OD x H x Thk |
Bulk Weight Kg/m3 |
Bulk Quantity Pcs/m3 |
| 16 | 16 x 8.9 x 1.1 | 135.6 | 299136 |
| 25 | 25 x 13 x 1.2 | 98 | 81500 |
| 38 | 38 x 19 x 1.4 | 58 | 27200 |
| 50 | 50 x 25 x 1.5 | 55 | 10740 |
| 76 | 76 x 37 x 3.0 | 68 | 3420 |
Property of Plastics
| Type of Plastic | Max Recommended Chemical Resistance Temperature | Specific Gravity | |
| PP | 220 F | 104ºC | 0.91 |
| PP ( 10% Fiber Glass Reinforced ) | 260 F | 127ºC | 0.97 |
| PVC | 150 F | 66ºC | 1.46 |
| CPVC | 185 F | 85ºC | 1.55 |
| PVDF | 290 F | 143ºC | 1.77 |
| ETFE | 300 F | 149ºC | 1.7 |
| PFA | 482 F | 250ºC | 2.2 |
Â
 Saiptech Plastic Cascade Mini Rings CMR Random Packing
Plastic Cascade Mini Ring is a made of heat resistant & corrosion resistant plastics such as PE, PP, RPP, PVC, CPVC and PVDF. As industry standard  well-known random packing, it has characteristics of :
• Low aspect ratio increases capacity and reduces pressure drop. The preferred vertical orientation of the packing axes allows free gas flow through the packed bed.Â
• Low pressure drop and high capacity allows smaller column diameter and blower sizes in new installations.Â
• Open structure and preferred vertical axis orientation inhibits fouling by allowing solids to be more easily flushed through the bed by the liquid.Â
• Ring and spoke construction and preferred vertical orientation provide high mechanical strength, which allows use in deep beds.
Typical Applications
Absorption, Stripping Towers, with many other environmental protection applications.
Typical Specification
| Type | Dimension/mm OD x H x Thk |
Bulk Weight Kg/m3 |
Bulk Quantity Pcs/m3 |
| 16 | 16 x 8.9 x 1.1 | 135.6 | 299136 |
| 25 | 25 x 13 x 1.2 | 98 | 81500 |
| 38 | 38 x 19 x 1.4 | 58 | 27200 |
| 50 | 50 x 25 x 1.5 | 55 | 10740 |
| 76 | 76 x 37 x 3.0 | 68 | 3420 |
Property of Plastics
| Type of Plastic | Max Recommended Chemical Resistance Temperature | Specific Gravity | |
| PP | 220 F | 104ºC | 0.91 |
| PP ( 10% Fiber Glass Reinforced ) | 260 F | 127ºC | 0.97 |
| PVC | 150 F | 66ºC | 1.46 |
| CPVC | 185 F | 85ºC | 1.55 |
| PVDF | 290 F | 143ºC | 1.77 |
| ETFE | 300 F | 149ºC | 1.7 |
| PFA | 482 F | 250ºC | 2.2 |
Â
Â
Froth pumps are the latest generation of foam pump/froth pump based on the advanced technology at home and abroad, including Foam Tank Froth Slurry Pump, High Pressure Slurry Pump. It could eliminate the foam/froth in the slurry in running and work normally even if the feeding slurry is not enough. Froth pump is the ideal products to deliver the frothy slurry, especially in the flotation technique process.
Features of Foam/Froth Pumps
1. On the bearing house, there is the motor base or motor support, which helps adopt belt drive or direct drive. It is very convenient to change the pulleys to adjust the speed and meet the changes of the work conditions.
2.The box is made of steel, stainless steel or rubber lined steel. It has the feeding suction and overflow box in the tangent line. The overflow box could deliver the surplus slurry back to the pool. The feeding suction in the tangent line could transport the slurry fast and eliminate part of the froth.
3. Froth pumps are of double-casing. The materials of the wet parts could be metal alloy, rubber or other non-metal material according to the slurry properties.
Application of Froth Pumps
It is used widely in the metallurgy, minerals, coal washery, chemical and other industrial departments, suitable for handing the abrasive and corrosive slurry with the froth.
Slurry Froth Pump,Froth Foam Pump,Centrifugal Froth Pump,Foam Tank Froth Slurry Pump, High Pressure Slurry Pump
Shijiazhuang Boda Industrial Pump Co., Ltd. , https://www.mineralslurrypump.com