Interlocking Sheet Insulation Nail Gun (M3-M5)
:
1. Human engineering design
2. High accuracy and automatic welding
3. Light weight, low heat
4. Corrosion resistant, strong lifting
Use of welding gun:
1. Suitable for large diameter studs and stud welding within the 3-5mm range
2. Aluminium gun body
3. The high heat diapersion performance
4. Stainless steel body buffer to ensure a good damping effect
5. Little weld spatter
The process and technology of Pull-arc welding gun:
1, Starting
2, Enhance the stud welding gun
3, Boot arc generation
4, The heat of the main arc generation the stud tip and the workpiece surface melting
5, After electric arc stopped, the stud will be advanced in melt layer by welding gun.
6, Completion of welding
Aluminum Die Casting Hardware Parts are a metal forming process in which molten aluminum metal is put under pressure and injected into a die. Aluminum weighs 1/3 of a comparable steel part. The Aluminum Parts would cost less to ship due to the weight and spend less expense than other manufacturing processes.
Aluminum Die Casting Hardware Parts are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.
Aluminum Die Casting Hardware Parts
Aluminum Die Casting of Hardware Parts, Aluminum Die Casting of Hardware, Aluminum Casting of Hardware Parts, Aluminum Castings of CNC Machining
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com