Waste Cable Wire Chinese Stripper Copper Stripping Peeling Recycling Machine
Application:
This cable wire stripper recycling machine is to stripe waste wire cable, then get copper or other metal into it in order to recycle materials.
Description:
This machine has the best and complete function. It has additional 5 rack cutter, double socket line hole. So it is suitable for all kinds of wires, make all kinds of rubber wires easier to strip. And also it can strip single or double core flat wires.
Stripping diameter range is 1-42mm.
This machine has 21 holes, including 13 round wire holes, 2 double holes (can strip double core flat wires), 5 rack cutter holes (can strip RVV), and 1 pressure hole (can strip directly Monofilament line).
Model | 918-WSKA | 918-WSKOB | 918-WSKB |
Voltage | 220V/380V | 220V/380V | 220V/380V |
Motor | 2.2KW | 2.2KW | 4KW |
Dimension(mm) | 600*580*840 | 700*610*840 | 800*580*1200 |
Weight | 80KG | 110KG | 200KG |
Capacity(KG/8H) | 400-1000 | 600-1500 | 200-3000 |
Chopping Range of Diameter | 1-35mm | 1-42mm | 2-98mm |
If you want more pictures,working video about our machine,send me inquiry withotu any hesitation.
I will reply you once i get your inquiry.
Best regards.
susan
      Waste cable wire stripper copper stripping peeling recycling machine
Application:
This cable wire stripper recycling machine is to stripe waste wire cable, then get copper or other metal into it in order to recycle materials.
Description:
This machine has the best and complete function. It has additional 5 rack cutter, double socket line hole. So it is suitable for all kinds of wires, make all kinds of rubber wires easier to strip. And also it can strip single or double core flat wires.
Stripping diameter range is 1-42mm.
This machine has 21 holes, including 13 round wire holes, 2 double holes (can strip double core flat wires), 5 rack cutter holes (can strip RVV), and 1 pressure hole (can strip directly Monofilament line).
Model | 918-WSKA | 918-WSKOB | 918-WSKB |
Voltage | 220V/380V | 220V/380V | 220V/380V |
Motor | 2.2KW | 2.2KW | 4KW |
Dimension(mm) | 600*580*840 | 700*610*840 | 800*580*1200 |
Weight | 80KG | 110KG | 200KG |
Capacity(KG/8H) | 400-1000 | 600-1500 | 200-3000 |
Chopping Range of Diameter | 1-35mm | 1-42mm | 2-98mm |
If you want more pictures,working video about our machine,send me inquiry withotu any hesitation.
I will reply you once i get your inquiry.
Best regards.
susan
Vertical type air handling unit
Air flow 1,000m3/h-50,000m3/h,Coil type 4rows/6rows/8rows
AMRTA air handling unit mainly constructed with filter, heat exchanger, fan motor, fan blower and other main components.
Characteristics:
1.Air handing unit applies colorful steel and galvanized panel as its interior and exterior panel. Inner stuff is the high density polyurethane foam,double pillar and tenon structure that ensures the strength of the unit and low air leakage.
2.High efficiency and low resistance nylon filter that reduce the power consumption obviously. Easy cleaning and simple operation; at the same time, higher level panel filter is optional too.
3.Coil applies pure and seamless copper tube and hydrophilic aluminum fin. Copper tube is under 12MPa water pressure expanding that can adapt to all kind of high pressure and no leakage, as well as ensure the lowest contact thermal resistance and highest heat transfer efficiency.
4.All fans in the unit are selected by professional software to ensure the best condition. Minimize the air volume and air pressure loose after meeting with the customer's requirements. Also ensure the good airflow and reduce the air duct noise.
Vertical Type Air Handling Unit
Vertical Type Air Handling Unit,Air Handling Unit Size Calculation,Air Handling Unit Catalogue Carrier,Horizontal Vertical Type Air Handling Unit
Jinan Amrta Air Conditioning Co.,Ltd , https://www.waterchiller.pl