Biologics Microbiology Laboratory Glass Seed Fermentor
Introduction of the glass bio fermenter
Total Volume: 5 Liter, 7 Liter,10L
Load Proportion: 65-80% of total volume, 70% optimum
Material: Vessel body is made of borosilicate glass to guarantee of resistance to high temp ,excellent corrosion resistance,top lid and thermostatic control . It meets fermentation technical requirement and mechanical sealed . And it equipped with air intake sterilization filter and exhaust condenser
Driver mechanical stirred directly from top with detachable DC motor
Sterilization sterilized in autoclave (Off-situ Sterilizable Mode)
Optional function:dosing material weighing ,tank weighing ,air flow automatic control,tank pressure detection,pure oxygen feeding bypass ,the REDOX potential on-line detection ,alcohol/methanol content online detection and control ,exhaust gas ,O2,CO2 on line detection,automatic sterilization function,automatic cleaning function tank cap automatically rising -lowering .
Control parts for glass fermenter  bioreactor | |
PH |
1. On-line check and measure, and digitization fully automatic control; 2.PH, acid and base gang control. Peristaltic pump automatically adjust to feed acid and base; 3.Control range 2-12pH, measure precision±0.01 pH, control precision±0.02 pH; 4.It has auto alarm function. 5.PH sensor and signal transmission line, HAMILTON |
DO control |
1. On-line check and measure, cascade with rpm; digital display. 2.Range 0-100% or 0-200%, precision ±1%; 3.It has auto alarm function; 4.DO sensor and signal transmission line, HAMILTON |
Foam control |
1. Automatically control and automatically alarm; 2. Stainless steel electrode check, peristaltic pump automatically add deformer. |
Feed control |
1. Automatically control and automatically alarm; 2.Stainless steel electrode check, peristaltic pump automatically feeding |
Temp. control |
1.PID fully digitization signal processing, digitization control settings 2.Circulating water automatically control temperature 3.Measure range 0-150°C, control range T+6-60°C,control precision±0.2°C 4.Pt 100Ω temp Sensor 5.system with electrical heater to control the temp inside vessel 6.water pump circulation, GRUNDFOS 7.solenoid valve to control |
Rotate speed |
1. Automatically control, with auto alarm function 2. Siemens frequency converter to adjust the speed. |
Pressure |
1 Manually adjusting with pressure gauge and manual valve (standard system) 2. Automatically adjusting with pressure transmitter and PID valve and pneumatic valves (optional) |
Air flow |
1.Manually adjusting with rotor meter and manual valve (standard system) 2.Automatically adjusting with mass-flow meter and pneumatic valves (optional) 3.Air in filter , tail gas filter , with SARTORIUS cartridge, precision 0.2μm |
Sterilization |
1.it can be SIP by connecting with steam 2.Manually control with manual valve (standard one) 3.Automatic control with pneumatic valves (optional) |
Control | Siemens PLC, and MCGSE 7"/10" LCD touch screen(HMI) and DEYEE program |
PC |
1.PC with Kingview software for recording function (optional) 2.PC with Siemens remote control and Kingview recording function (optional) 3.printer (optional) |
 The Glass fermenter bioreactor application :
It could be used for diary,beverage ,bio pharmaceutical,medicine ,fine chemical industry ,laboratory,pilot teÂ
 Biologics microbiology laboratory glass seed fermentorÂ
Introduction of the glass bio fermenter
Total Volume: 5 Liter, 7 Liter,10L
Load Proportion: 65-80% of total volume, 70% optimum
Material: Vessel body is made of borosilicate glass to guarantee of resistance to high temp ,excellent corrosion resistance,top lid and thermostatic control . It meets fermentation technical requirement and mechanical sealed . And it equipped with air intake sterilization filter and exhaust condenser
Driver mechanical stirred directly from top with detachable DC motor
Sterilization sterilized in autoclave (Off-situ Sterilizable Mode)
Optional function:dosing material weighing ,tank weighing ,air flow automatic control,tank pressure detection,pure oxygen feeding bypass ,the REDOX potential on-line detection ,alcohol/methanol content online detection and control ,exhaust gas ,O2,CO2 on line detection,automatic sterilization function,automatic cleaning function tank cap automatically rising -lowering .
Control parts for glass fermenter  bioreactor | |
PH |
1. On-line check and measure, and digitization fully automatic control; 2.PH, acid and base gang control. Peristaltic pump automatically adjust to feed acid and base; 3.Control range 2-12pH, measure precision±0.01 pH, control precision±0.02 pH; 4.It has auto alarm function. 5.PH sensor and signal transmission line, HAMILTON |
DO control |
1. On-line check and measure, cascade with rpm; digital display. 2.Range 0-100% or 0-200%, precision ±1%; 3.It has auto alarm function; 4.DO sensor and signal transmission line, HAMILTON |
Foam control |
1. Automatically control and automatically alarm; 2. Stainless steel electrode check, peristaltic pump automatically add deformer. |
Feed control |
1. Automatically control and automatically alarm; 2.Stainless steel electrode check, peristaltic pump automatically feeding |
Temp. control |
1.PID fully digitization signal processing, digitization control settings 2.Circulating water automatically control temperature 3.Measure range 0-150°C, control range T+6-60°C,control precision±0.2°C 4.Pt 100Ω temp Sensor 5.system with electrical heater to control the temp inside vessel 6.water pump circulation, GRUNDFOS 7.solenoid valve to control |
Rotate speed |
1. Automatically control, with auto alarm function 2. Siemens frequency converter to adjust the speed. |
Pressure |
1 Manually adjusting with pressure gauge and manual valve (standard system) 2. Automatically adjusting with pressure transmitter and PID valve and pneumatic valves (optional) |
Air flow |
1.Manually adjusting with rotor meter and manual valve (standard system) 2.Automatically adjusting with mass-flow meter and pneumatic valves (optional) 3.Air in filter , tail gas filter , with SARTORIUS cartridge, precision 0.2μm |
Sterilization |
1.it can be SIP by connecting with steam 2.Manually control with manual valve (standard one) 3.Automatic control with pneumatic valves (optional) |
Control | Siemens PLC, and MCGSE 7"/10" LCD touch screen(HMI) and DEYEE program |
PC |
1.PC with Kingview software for recording function (optional) 2.PC with Siemens remote control and Kingview recording function (optional) 3.printer (optional) |
 The Glass fermenter bioreactor application :
It could be used for diary,beverage ,bio pharmaceutical,medicine ,fine chemical industry ,laboratory,pilot teÂ
Â
Evotec High Voltage Generator including 13.8kV High Voltage Generator, Three Phase Diesel Generator , 13.8Kv High Voltage Generator ,60Hz Synchronous Brushless Generator,13800V Synchronous Brushless Generator.Our alternator are widely used in industry, commercial, real estate, hospital, hotel, railway, telecommunications, data-centers and mining etc.
The specific technical features are listed below:
Speed: 1500rpm or 1800rpm
Frequency: 50 Hz or 60Hz
Number of Poles: 4
Power: up to 3500KVA
Voltage: 110V-690V,High Voltage:3.3KV-13.8KV
Insulation: class H
Power Factor: 0.8
Voltage Regulation Rate: ±0.5%
Altitude: 1000M
Temperature Rise Class: class H
Ambient Temperature: 40
Overload:10% for 1 hour in every 12 hours
Degree of Protection: IP21 (IP23, IP44, IP54 on request)
Special Features:
- higher motor starting capability
- a reliable long life with superior class H insulation
- high thyristor load withstand capability for mobile phone and telecom applications
- ease of maintenance with integrated components and outboard exciter/rotating rectifier
- wide range of coupling discs/adaptor for single bearing configuration, suitable for wide range of engine brands
13.8kV High Voltage Generator
13.8kV High Voltage Generator
Three Phase Diesel Generator,13.8Kv High Voltage Generator,60Hz Synchronous Brushless Generator,13800V Synchronous Brushless Generator
EvoTec Power Generation Co., Ltd , https://www.evotecgen.com