Shock Test Industrial Environmental Equipment
Model: YTST-080
Brief introduction and application fields:
Thermal cycle test chamber is applied to test electronic chip IC, PCB, of semiconductor ceramic and
polymer materials physical changes, and test the bearing extent of the material structures and composite
material in an instant and continuous high temperature and extremely low temperature environment...
Main features of the equipment:
1. Standard combined design and popular in markets.
2. SUS#304 stainless steel, firm structure, waterproof ability.
3. Suitable for test with large quantity and volume products.
4. Adopt imported large LCD Chinese/English microcomputer temperature controller, easy setting, strong function.
5. Standard RS-232C communication interface device.
6. Unique circulation duct design and popular in markets.
7. Comprehensive security control design, adopt intelligent PID+SST/SCR inverse two-way synchronous output, including the slope of the advanced control logic.
8. Heating box and explosion-proof heater design, advanced PID servo control, security, stab ility and reliability.
9. Best after sales service: 12 months of free parts maintenance service.
10. Comply with major international test standards.
11. Customization is available & buyer's ideas are warmly welcomed.
In addition to the Thermal shock tester, we are also manufacturing:
Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Air Thermal
Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp.
Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test
equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.
For more technical details, please refer to the attached data sheet.
Â
Model | YTST-056 | YTST-087 | YTST-126 | |||||
Internal Dim.W×H×D(mm) | 400×350×440 | 500×350×500 | 600×350×600 | |||||
External Dim.W×H×D(mm) | 1500×2050×2120 | 1600×2050×2220 | 1700×2050×2320 | |||||
Pre-heat Limit | +200°C | |||||||
Pre-cool Limit | -60°C    -75°C | |||||||
Test Temp. Range | +60°C ~+150°C;  -10°C~-50°C;  -10°C~-65°C | |||||||
Performance | Temp. Constancy | ±2°C | ||||||
Temp. Recover Time | Within 5 mins | |||||||
Heat-up Time | °C | 150 | 150 | 150 | ||||
min | 30 | 30 | 30 | |||||
Pull-down Time | °C | -50      -65 | -50      -65 | -50      -65 | ||||
min | 90Â Â Â Â Â Â 90 | 90Â Â Â Â Â Â 90 | 90Â Â Â Â Â Â 90 | |||||
Material | Exterior | Stainless steel plate + Powder Coated | ||||||
Interior | SUS # 304 stainless steel plate (Hairline Finish) | |||||||
Insulation | PU & Fiberglasswool | |||||||
Systems | Circulation | siroco fan | ||||||
Heating | stripped wire heater | |||||||
Refrigeration | Compressor+Evaporator fins+water-cooling condenser | |||||||
Controller | 1P | |||||||
Other Components | Exper iment separation shelves(freely adjustable 2pcs) | |||||||
Safety Devices | No fuse breaker,Motor overload protection High/low pressure shut off device, Open door operation prevention switch, Flow switch protector cooling water. |
|||||||
Power Source(K.W.) | AC 1Ψ 220V;3Ψ 380V 60/50Hz | |||||||
90Â Â Â Â Â Â 90 | 90Â Â Â Â Â Â 90 | 90Â Â Â Â Â Â 90 |
Other styles / size with different configurations are available upon request.Â
Welcome to enquire and purchase !
Ms. Vickey Huang
Â
The part of impeller and Diffuser in electric Petroleum Submersed Pump is a principal component in the pump, which drives the impeller to make high-speed rotation in certain rev by motor. The impeller makes centrifugal movement to transport liquid to the guide shell whose function is to make energy conversion and convey it to the impeller of subordinate grade. Hierarchical conversion and transmission make each grade of impeller and diffuser generate lift increase and accumulate to lift for the whole pump. The impeller and diffusers manufactured by the Group adopt CAD software design and apply CAM five-shaft processing die, ensuring stability and accuracy in molded lines for impeller and diffuser products. Meanwhile, it supplies three hydraulic performance parameters including lift, flow and efficiency in the product of impeller and diffuser for users so as to design the optimal product. Besides, there are products made from different materials such as ferronickel, nickelic abrasion resistant ferronickel, copper alloy, and stainless steel depending on well conditions for users to select, satisfying demands of users for difference in shaft diameter.
The Group has become a supermarket for products of impeller and diffuser and petroleum-submersed pump accessories manufactured both at home and abroad.
Impeller And Diffuser
Diffuser Ni-Resist,Submersible Oil Pump Impeller,Plastic Diffuser
Tianjin RongHeng Group LLC , http://www.ronghenggrouppump.com