Normally Open Steam Solenoid Valve
- Model NO.: SLA SERIES
- Connection Form: Thread
- Material: Brass & Stainless Steel
- Valve Structure: Pilot Piston Structure
- Usage: Flow Control
- Application: Industrial Usage, Water Industrial Usage, Household Usage
- Valve: Teflon
- Steam Solenoid Valve: 15~50mm
- Specification: ISO & TUV & CE
- HS Code: 8481804090
- Actuator: Electric
- Type: Pilot Operated
- Pressure: High Temperature
- Power Supply: AC or DC Solenoid Valve
- Standard: DIN
- Solenoid Valve: 3/8′′~2′′ Flange
- Steam Valve: 0.5~10bar
- Trademark: SANLIXIN
- Origin: Yuyao, Zhejiang, China
Solenoid Valve (SLA)
PRODUCTS
SLA Brass Series. 2/2-way Piston Solenoid Valve. Normally Open
Body Material: Forged Brass
Orifice: 15mm~40mm
Pipe Connection: 3/8"~1/2"
Fluid Media: Steam\Water\Hot Water\Air\Oil etc.
SOLENOID VALVE
2 WAY 1/8 TO 1 INCH,
HIGH PRESSURE UP TO 100BAR
24VDC 220VAC 380VAC
SOLENOID VALVE
2-Way normally closed solenoid valve;
Closed when de-energized, open when energized.
Body material: Brass, and stainless steel,
Voltage: 220VAC /230VAC/380VAC/50/60HZ 24VDC;
Voltage Tolerance: +10% to -10% applicable voltage;
Ambient Temp. 0 ~65 Fluids Temp 0 ~110
Flow as the arrow. Mounts in any position; Best position is
Solenoid vertical and upright diriction.
Serialized products. Small in size. Large flow rate. Widely use. L.
Coil can fix Germany Nass Coil.
Yuyao Sanlixin Solenoid Valve Co., Ltd specializes in designing and manufacturing all kinds of fluid solenoid valves.
Our solenoid valve have direct acting type, pilot operated type, piston types
The body can be made of brass, stainless steel, plastic, Teflon and aluminum and the seals can be made of NBR, EPDM, viton, Teflon, PTFE silicon
The valve size can be DN1.00mm to DN150mm; Media can be water, hot water, gas, air, steam. Light oil, weak acid& alkali fluids etc.
So our solenoid valves are suitable for all the general purpose equipment.
New | Pipe | Orifice | Pressure | Seals | Body |
Model code | Size | (mm) | (bar) | Material | |
SLA2WH02T1C15 | 3/8 | 15 | 0.5~8 | TEFLON | Forged brass |
SLA2WH02T1D15 | 1/2 | 15 | 0.5~8 | TEFLON | Forged brass |
SLA2WH02T1E20 | 3/4 | 20 | 0.5~8 | TEFLON | Forged brass |
SLA2WH02T1G25 | 1 | 25 | 0.5~8 | TEFLON | Forged brass |
SLA2WH02T1H35 | 11/4 | 35 | 0.5~8 | TEFLON | Forged brass |
SLA2WH02T1J35 | 11/2 | 35(40) | 0.5~8 | TEFLON | Forged brass |
SLA2WH02T1K50 | 2 | 50 | 0.5~10 | TEFLON | Forged brass |
In strict accordance with ISO 9001:20015 and Wind Turbine Forging;
1.Make process card and quality plan
2.Choose the qualified raw material and do incoming test, not allowed
nonconforming material to enter into production process;
3.Producing and testing followed the quality documents
4.Be good at Quality records and product identification to ensure the product
traceability
5.Do the final inspection to ensure 100% of pass.
Wind Turbine Forging
Wind Turbine Forging,Wind Turbine Forging Quality ,Custom Wind Wind Turbine Forging,High Quality Wind Turbine Forging
Shanxi Tianbao Group Co.,Ltd. , https://www.tbflange.com