DIN 7991 A4-70 Stainless Socket Cap Flat Head Screws
Flat heads are countersunk (cone shaped under the head) with a flat top.  Allen (hex socket) drive is a six-sided recess for use with an allen wrench (Allen key).
A4-70 Stainless steel is a kind of auntensitic steel SS316, but has bigger tensile strength than common SS316, like 316CU.
Specification
Â
| Type | Machine Screw/Socket Cap Screw |
| Finish | Plain |
| Head Type | Flat Countersunk |
| Drive Type | Hex / Allen Socket |
| Diameter | M6 ~Â M10 |
| Length | 6.00mm ~Â 100mm |
| Standard | DIN 7991 |
| Stock | Pre-order |
Contact
If you're insterested in our stainless steel flat head socket head cap screw, please do not hesitate to send us email or call us at +8615867456779(Mobile)directly.
For stock, we suggest you double check from us before placing order, thank you!
 DIN 7991 A4-70 Stainless Steel Flat Head Allen Socket Cap Screw
Flat heads are countersunk (cone shaped under the head) with a flat top.  Allen (hex socket) drive is a six-sided recess for use with an allen wrench (Allen key).
A4-70 Stainless steel is a kind of auntensitic steel SS316, but has bigger tensile strength than common SS316, like 316CU.
Specification
Â
| Type | Machine Screw/Socket Cap Screw |
| Finish | Plain |
| Head Type | Flat Countersunk |
| Drive Type | Hex / Allen Socket |
| Diameter | M6 ~Â M10 |
| Length | 6.00mm ~Â 100mm |
| Standard | DIN 7991 |
| Stock | Pre-order |
Contact
If you're insterested in our stainless steel flat head socket head cap screw, please do not hesitate to send us email or call us at +8615867456779(Mobile)directly.
For stock, we suggest you double check from us before placing order, thank you!
Â
According to regulations, live birds reception should be at the wind down area of the processing plant. Including parking area, slaughtering-waiting area, unloading ,live birds hanging, stunning and bleeding area, crates cleaning, crate pelleting,vehicle disinfection area,waste store ,reception and urgent killing area and so on. The slaughterhouse is appropriate to single layer, net height is not less than 4.2 meter, the polar space not less than 6 meter, hanging area is the main workshop bleeding room design to be darkroom which separate with our working area.Close to one side to receiving area is to be working area, including clearing room, official quarantine room, if have halal products, should with one rest room for Iman.
1.Live poultry vehicles should have special road. There is a disinfection pool which same wide as door at the entrance for live poultry enter..The pool size is about 3 meters long and 100 to 150mm deep.
2. UnloadingThe platform built which height is same as vehicles which save much labor. Two workers unloading crates from vehicle,each time unload 8 to 9 layer of crate, each hour unloading 12000birds. Normally unloading platform should be keep some crates. According to WSPA regulations, when live birds reach slaughterhouse should be killed within 1hour,max. Not more than 2 hours, for one slaughterhouse which to slaughter 12000birds/H, the parking place should be suitable for 5 trucks, unloading area is suitable for 2 trucks, crates pelleting area is suitable for 3 trucks, and with spare crates storage room to keep spare crates.
3. Live birding hangingThere should be a darkroom after birds hanging and stunning, the orbit of overhead conveyor line should be kept level,straight ,try to reduce the turns and movements; The overhead conveyor line with synchronous control system and emergency stop system to ensure the reliable running of the processing line. The appropriate shackles are used according to different type of poultry and raising period; Try to keep poultry appease to prevent wings injury from struggling to ensure meat quality.
Live Bird Receiving Unit, Chicken Hanging Unit, Live Bird Reception, Chicken Reception
Connect Group For Poultry Project , https://www.connectpoultry.com