Cable Reel Powered Dies Handling Vehicle for Heavy Industry
Model NO.: KPJ
Power Supply: Cable Drum
Application: Industry ,Factory ,Warehouse
Export Markets: Global
Condition: New
Trademark: BEFANBY
Transport Package: According to Your Requirements.
Specification: CE, ISO9000, SGS
Origin: China
HS Code: 8428909090
Model NO.: KPJ
Power Supply: Cable Drum
Application: Industry ,Factory ,Warehouse
Export Markets: Global
Condition: New
Trademark: BEFANBY
Transport Package: According to Your Requirements.
Specification: CE, ISO9000, SGS
Origin: China
HS Code: 8428909090
Brief introduction---Cable Reel Powered Dies Handling Vehicle for Heavy IndustryRail cart, also called transfer trolley, transfer cart and climbing transfer cart, is a kind of electric material handling
equipment. This kind of dies handling vehicle is powered by cable reel (also called cable drum) to drive wheels and
make the car start, stop, go forward and backward, speed up and slow down and so on.This dies handling vehicle
can be used both on the "s"and arc-shaped railways.
Characters of Cable Reel Powered Dies Handling Vehicle for Heavy Industry
·  Anti-explosion
·  Anti-high temperature
·  Apply to various occasions
·  stable start, big starting power, small impact to the gear reducer, low voltage, long lifetime and so on.
·  It has no strict requirement for the construction of the railway
·  No limit of running hours
·  Safe and convenient operation for there is no wire outside the car
·  Adjustable speed
Technical Parameters of Cable Reel Powered Dies Handling Vehicle for Heavy Industry
| Model | KPJ-2t | KPJ-20t | KPJ-50t | KPJ-100t | KPJ-150t | |
| Rated Load(t) | 2 | 20 | 50 | 100 | 150 | |
| TableSize(mm) | Length(L) | 2000 | 4000 | 5500 | 6500 | 10000 |
| Width(W) | 1500 | 2000 | 2500 | 2800 | 3000 | |
| Heigth(H) | 450 | 550 | 650 | 850 | 1200 | |
| Wheel Base(mm) | 1200 | 2800 | 4200 | 4900 | 7000 | |
| Rail Inner Gauge(mm) | 1200 | 1435 | 1435 | 2000 | 2000 | |
| Wheel Diameter(mm) | 270 | 350 | 500 | 600 | 600 | |
| Wheel Quantity | 4 | 4 | 4 | 4 | 8 | |
| Ground Clearance(mm) | 50 | 50 | 50 | 75 | 75 | |
| Running Speed(mm) | 25 | 20 | 20 | 20 | 18 | |
| Motor Power(kw) | 0.8 | 2.5 | 5.5 | 11 | 15 | |
| Max Wheel Load(KN) | 14.4 | 77.7 | 174 | 343.8 | 265.2 | |
| Reference Weight(t) | 2.3 | 5.5 | 7.6 | 13.9 | 26 | |
| Recommended Rail Model | P15 | P24 | P43 | QU100 | QU100 | |
Automated emergency-stop dies handling vehicle can transfer and handling structure, steel pipe, steel billets, steel ladle
and coil, etc Paper roll plant: transfer paper coil Painting shops: transfer workpiece into the painting room Sand blasting
room Other industries: shipbuilding, quarries, warehouses and multi-bay workshops, etc
Components show
Processing Line
Packing&Delivery
About Us
Xinxiang Hundred Percent Electrical and Mechanical Co., Ltd is a collection of research, design, manufacture,
installation and after-sales service of electric handling bogie ,dies handling vehicle as one of the professional
manufacturing company, which has a modernized management team and excellent staff.And our products gets CE,
SASO,SGS,ISO certificate and other 8 national patent, our products have been exported to more than 40 countries and
regions,such as Germany, Mexico, USA, Turkey, South Africa, Singapore etc.
Our Certificate show
Our Customer show
Our production application show
Why choose us
·  BEFANBY's dies handling vehicle are all by no less than 120% Load Bearing Safety test before shipping.
·  BEFANBY's dies handling vehicle are all trustworthy and legitimate names in the industry.
·  BEFANBY's dies handling vehicle are design and built meeting JB/T6127-92 and Crane Girder Standards ensure
durability and long lifetime.
·  BEFANBY's dies handling vehicle's manufacturing capacity range from 1 ton to 300 tons.
·  All products are Crane Standard Slab Steel Beam Box Structure,safety, little table deformation and large load capacity.
·  Working normally before shipping and easy operation,No need professional training operator.
·  Heady duty packaging to provide protection during shipping.
·  More than 1000 products and 587 custom design molds accumulation,committed to meet your one-stop-shop of
factory material transfer carts.
·  We offer: rail construction project design and construction CAD drawing, whole series of standard CAD rail cart
drawing and operation manual.
Product supply scope
| Product Name | Model No. | Power Supply Mode | Load Capacity | Other Items | Usage |
| Rail Transfer Cart | KPD | Conductor Rail | Load range 1-300ton, can be customized per client demand | Running distance | Ordinary goods,such as steel plate, workpiece,equipment etc special goods,such as coil. column,ladle etc |
| Battery Powered Transfer Car | KPX | Battery | Using frequency | ||
| Motorized Transfer Trolley | KPJ | Cable Drum | Running distance | ||
| Busbar Powered Handling Cart | KPC | Busbar | Working shop | ||
| Towed Rail Trailer | KP | Tractor | 1-100t | Working shop | |
| Steerable Towed Car | BWT | Tractor | Load range 1-50t, less than 20t, cement floor is ok. More than 20t,steel floor is demanded. | Working environment | |
| Trackless Handling Machine | BWP | Battery | Working path |
Customized
·  load capacity, table size, and rail gauge can be customized
·  opinions:
1>remote radio control(import or made in china) Automatic stop when detecting obstacle or person, limit switches(to
limit travel)
2>Battery type (Free of maintenance Battery, lithium battery, explosion-proof battery, and anti-high temperature battery)
3>motor(DC motor with brush and DC motor brushless
4> Electrical parts (imported or made in china)
How to choose the suitable handling vehicle?
·  All of our dies handling vehicle all customized as client's requirement, for choose the most suitable handling vehicle,
please kindly providing the following information:
·  Transfer or handling what material/cargo?
·  What capacity do you need?
·  This handling vehicle is running on rails or ground(floor)?
·  Your requirement for table size:length,width and height?
·  How about the running distance?
 Brief introduction---Cable Reel Powered Dies Handling Vehicle for Heavy Industry
Rail cart, also called transfer trolley, transfer cart and climbing transfer cart, is a kind of electric material handling
equipment. This kind of dies handling vehicle is powered by cable reel (also called cable drum) to drive wheels and
make the car start, stop, go forward and backward, speed up and slow down and so on.This dies handling vehicle
can be used both on the "s"and arc-shaped railways.
Characters of Cable Reel Powered Dies Handling Vehicle for Heavy Industry
·  Anti-explosion
·  Anti-high temperature
·  Apply to various occasions
·  stable start, big starting power, small impact to the gear reducer, low voltage, long lifetime and so on.
·  It has no strict requirement for the construction of the railway
·  No limit of running hours
·  Safe and convenient operation for there is no wire outside the car
·  Adjustable speed
Technical Parameters of Cable Reel Powered Dies Handling Vehicle for Heavy Industry
| Model | KPJ-2t | KPJ-20t | KPJ-50t | KPJ-100t | KPJ-150t | |
| Rated Load(t) | 2 | 20 | 50 | 100 | 150 | |
| TableSize(mm) | Length(L) | 2000 | 4000 | 5500 | 6500 | 10000 |
| Width(W) | 1500 | 2000 | 2500 | 2800 | 3000 | |
| Heigth(H) | 450 | 550 | 650 | 850 | 1200 | |
| Wheel Base(mm) | 1200 | 2800 | 4200 | 4900 | 7000 | |
| Rail Inner Gauge(mm) | 1200 | 1435 | 1435 | 2000 | 2000 | |
| Wheel Diameter(mm) | 270 | 350 | 500 | 600 | 600 | |
| Wheel Quantity | 4 | 4 | 4 | 4 | 8 | |
| Ground Clearance(mm) | 50 | 50 | 50 | 75 | 75 | |
| Running Speed(mm) | 25 | 20 | 20 | 20 | 18 | |
| Motor Power(kw) | 0.8 | 2.5 | 5.5 | 11 | 15 | |
| Max Wheel Load(KN) | 14.4 | 77.7 | 174 | 343.8 | 265.2 | |
| Reference Weight(t) | 2.3 | 5.5 | 7.6 | 13.9 | 26 | |
| Recommended Rail Model | P15 | P24 | P43 | QU100 | QU100 | |
Automated emergency-stop dies handling vehicle can transfer and handling structure, steel pipe, steel billets, steel ladle
and coil, etc Paper roll plant: transfer paper coil Painting shops: transfer workpiece into the painting room Sand blasting
room Other industries: shipbuilding, quarries, warehouses and multi-bay workshops, etc
Components show
Processing Line
Packing&Delivery
About Us
Xinxiang Hundred Percent Electrical and Mechanical Co., Ltd is a collection of research, design, manufacture,
installation and after-sales service of electric handling bogie ,dies handling vehicle as one of the professional
manufacturing company, which has a modernized management team and excellent staff.And our products gets CE,
SASO,SGS,ISO certificate and other 8 national patent, our products have been exported to more than 40 countries and
regions,such as Germany, Mexico, USA, Turkey, South Africa, Singapore etc.
Our Certificate show
Our Customer show
Our production application show
Why choose us
·  BEFANBY's dies handling vehicle are all by no less than 120% Load Bearing Safety test before shipping.
·  BEFANBY's dies handling vehicle are all trustworthy and legitimate names in the industry.
·  BEFANBY's dies handling vehicle are design and built meeting JB/T6127-92 and Crane Girder Standards ensure
durability and long lifetime.
·  BEFANBY's dies handling vehicle's manufacturing capacity range from 1 ton to 300 tons.
·  All products are Crane Standard Slab Steel Beam Box Structure,safety, little table deformation and large load capacity.
·  Working normally before shipping and easy operation,No need professional training operator.
·  Heady duty packaging to provide protection during shipping.
·  More than 1000 products and 587 custom design molds accumulation,committed to meet your one-stop-shop of
factory material transfer carts.
·  We offer: rail construction project design and construction CAD drawing, whole series of standard CAD rail cart
drawing and operation manual.
Product supply scope
| Product Name | Model No. | Power Supply Mode | Load Capacity | Other Items | Usage |
| Rail Transfer Cart | KPD | Conductor Rail | Load range 1-300ton, can be customized per client demand | Running distance | Ordinary goods,such as steel plate, workpiece,equipment etc special goods,such as coil. column,ladle etc |
| Battery Powered Transfer Car | KPX | Battery | Using frequency | ||
| Motorized Transfer Trolley | KPJ | Cable Drum | Running distance | ||
| Busbar Powered Handling Cart | KPC | Busbar | Working shop | ||
| Towed Rail Trailer | KP | Tractor | 1-100t | Working shop | |
| Steerable Towed Car | BWT | Tractor | Load range 1-50t, less than 20t, cement floor is ok. More than 20t,steel floor is demanded. | Working environment | |
| Trackless Handling Machine | BWP | Battery | Working path |
Customized
·  load capacity, table size, and rail gauge can be customized
·  opinions:
1>remote radio control(import or made in china) Automatic stop when detecting obstacle or person, limit switches(to
limit travel)
2>Battery type (Free of maintenance Battery, lithium battery, explosion-proof battery, and anti-high temperature battery)
3>motor(DC motor with brush and DC motor brushless
4> Electrical parts (imported or made in china)
How to choose the suitable handling vehicle?
·  All of our dies handling vehicle all customized as client's requirement, for choose the most suitable handling vehicle,
please kindly providing the following information:
·  Transfer or handling what material/cargo?
·  What capacity do you need?
·  This handling vehicle is running on rails or ground(floor)?
·  Your requirement for table size:length,width and height?
·  How about the running distance?
Â
Aging Oven,Aging Furnace,Electric Furnace Cost,Industrial Aging Furnace
Changxing Jiacheng Furnace Industry Co. Ltd , https://www.jcfurnace.com