The introduction of the new national standard, truck preferred slower installation installation Taylor

With the introduction of the new standards for the “Safety of Motor Vehicles for Operational Safety” (GB7258) regulation, a discussion about retarders began in China. The new standard states: “Trucks and dangerous goods carriers exceeding 12 tons will be forced to install slowly. "The speeder or other auxiliary braking device", while the truck user's understanding of the retarder is still in the cognitive stage, and is not very clear. Therefore, the drivers still have doubts about whether the retarder can guarantee safety and optimize the braking system. It is not common for retarders to be used on trucks.

Because it is not universal, the potential of retarder in China's market is huge. A large part of the market capacity of China's car retarder depends on the truck demand. As the media reported, truck accidents are happening every day on our country's roads. Search engines enter trucks and accidents. It is easy to find out about two days of relatively big accidents. Actually, no accidents have been reported in the media. In comparison, it is not just how many times.

Although China's truck retarder market has great potential, it will be difficult for the market to open up within 1 to 3 years. It requires companies to dig deeper, and at the same time requires active guidance of relevant laws and regulations.

Teller Retarder FN71.95

Teller Retarder FN71.95

The reason why trucks need to install retarders depends on the road conditions they are driving. Trucks often have to go downhill, bend, and use braking systems at a very high frequency, so installing retarders is a must. However, the reason why the retarder has not yet been pushed forward is that the country lacks corresponding policies and regulations, and the market has not yet been opened. Compared to ABS systems, the retarder is still part of the non-mandatory installation. If the policy is tight, the retarder will soon become an essential accessory for trucks.

With the increase of the engine power of the automobile, the acceleration of the vehicle speed and the improvement of the on-board quality, the safety of the car has become extremely severe. The main braking method of the car is still frictional braking, although the improvement of the friction performance of the brake shoe and the hub shortens the one-time braking distance, and many advanced electronic technologies, such as anti-lock braking system ABS, electronic braking system EBS The application of products such as the drag control system ASR enables the braking reliability to be greatly improved within the effective capacity of the friction braking system, but due to the temperature of the brake under long-term or long-distance downhill and frequent braking conditions. Excessive wear and brake wear have not significantly improved the durability of the brakes.

As for the best in the retarder industry, then Tellabs was the leader. After the company's eddy current retarder products were applied to heavy-duty vehicles, safety, economy, and comfort have been achieved by the vast majority of transport units. It is the unanimous approval of the bus company. It is understood that through the perfection of nearly a century, Teller eddy current retarder products are currently available to the general public to provide eddy current retarder products of 2 types, 6 series and nearly 100 kinds of specifications to meet 2.8 tons to 44 tons. The use of passenger cars, vans and special vehicles, and Tellomar retarder also provides safe deceleration for elevators and Alpine cable cars in the Eiffel Tower in France.

Compared to other brands, Tellomar retarder can make vehicle operation safer and more economical than other eddy retarders. Talmer retarder shortens the braking distance by more than 15% compared with other similar products, about 18 meters; prolongs the service life of the shoes at least twice; fuel consumption per 100 kilometers saves about 0.6 liters or more and less than five ten thousandths. failure rate. Tellomar retarder is well received by Chinese users for its superior performance and stable and reliable quality.

For more information on Tellabs Retarder, please click: http://

Other twin screw extruder

Granulation Line,Extrusion Granulation Line,Double Screw Extrusion

QINGDAO SHUNDE PLASTIC MACHINE CO.,LTD , http://www.shunde-china.com