Online Unqualified Turbine Oil Filtration Machine with Good Reputation
Application:Â
This oil purification plant is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This product, which can rapidly and effectively remove the water, gas and impurities, aim at turbine oil's nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oil's nature.
Â
Advantage:
This machine breaks emulsification thoroughly, and the oil is very difficult to emulsify again after treatment. Its dehydration volume is large and it can absorb water on line. TY series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.
Â
And this equipment is high environmentally friendly because it treating the oil totally physically, no Chemical additives, no  Chemical reaction.
Â
Feature:Â
1. Breaking emulsification thoroughly with high- molecule polymeric material, the value of breaking emulsification ≤15min (GB/F 7305).
2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water.
3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).
4. With the trapezoidal, spiral, automatic back flushing system.
5. With the advanced dielectric condensation devices.
6. On-line oil purification can be carried out with turbine or water turbine automatically without any person.Â
Technical Parameter
item |
unit |
TY-10 |
TY-20 |
TY-30 |
TY-50 |
TY-100 |
TY-150 |
TY-200 |
||
Flow rate |
L/h |
600 |
1200 |
1800 |
3000 |
6000 |
9000 |
12000 |
||
Working vacuum degree |
Mpa |
0.06Â Â ~Â 0.095 |
||||||||
Working pressure |
Mpa |
≤0.3 |
||||||||
Running temperature |
ºC |
40 ~ 70(the temperature of turbomachine below 55ºC) |
||||||||
Heating power |
KW |
14 |
16 |
18 |
30 |
45 |
55 |
60 |
||
Total power |
KW |
16 |
18 |
20 |
33 |
48 |
61 |
71 |
||
Inlet/outlet caliber |
mm |
φ25 |
φ25 |
φ25 |
φ32 |
φ42 |
φ50 |
φ50 |
||
Size |
L |
mm |
1280 |
1350 |
1350 |
100 |
1500 |
500 |
1600 |
|
W |
mm |
750 |
900 |
950 |
950 |
1000 |
1200 |
1350 |
||
H |
mm |
1450 |
1450 |
1500 |
1600 |
1650 |
1800 |
1800 |
||
Weight |
Kg |
320 |
400 |
420 |
450 |
750 |
800 |
900 |
||
 |
Â
Table2Guarantee Data after Purification
Capability item |
Data |
Moisture |
≤100PPM |
Break emulsification value |
≤15min (GB/F 7305) |
Clean degree |
≤6grade (NAS1638) |
Application:Â
This oil purification plant is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This product, which can rapidly and effectively remove the water, gas and impurities, aim at turbine oil's nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oil's nature.
Â
Advantage:
This machine breaks emulsification thoroughly, and the oil is very difficult to emulsify again after treatment. Its dehydration volume is large and it can absorb water on line. TY series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.
Â
And this equipment is high environmentally friendly because it treating the oil totally physically, no Chemical additives, no  Chemical reaction.
Â
Feature:Â
1. Breaking emulsification thoroughly with high- molecule polymeric material, the value of breaking emulsification ≤15min (GB/F 7305).
2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water.
3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).
4. With the trapezoidal, spiral, automatic back flushing system.
5. With the advanced dielectric condensation devices.
6. On-line oil purification can be carried out with turbine or water turbine automatically without any person.Â
Technical Parameter
item |
unit |
TY-10 |
TY-20 |
TY-30 |
TY-50 |
TY-100 |
TY-150 |
TY-200 |
||
Flow rate |
L/h |
600 |
1200 |
1800 |
3000 |
6000 |
9000 |
12000 |
||
Working vacuum degree |
Mpa |
0.06Â Â ~Â 0.095 |
||||||||
Working pressure |
Mpa |
≤0.3 |
||||||||
Running temperature |
ºC |
40 ~ 70(the temperature of turbomachine below 55ºC) |
||||||||
Heating power |
KW |
14 |
16 |
18 |
30 |
45 |
55 |
60 |
||
Total power |
KW |
16 |
18 |
20 |
33 |
48 |
61 |
71 |
||
Inlet/outlet caliber |
mm |
φ25 |
φ25 |
φ25 |
φ32 |
φ42 |
φ50 |
φ50 |
||
Size |
L |
mm |
1280 |
1350 |
1350 |
100 |
1500 |
500 |
1600 |
|
W |
mm |
750 |
900 |
950 |
950 |
1000 |
1200 |
1350 |
||
H |
mm |
1450 |
1450 |
1500 |
1600 |
1650 |
1800 |
1800 |
||
Weight |
Kg |
320 |
400 |
420 |
450 |
750 |
800 |
900 |
||
 |
Â
Table2Guarantee Data after Purification
Capability item |
Data |
Moisture |
≤100PPM |
Break emulsification value |
≤15min (GB/F 7305) |
Clean degree |
≤6grade (NAS1638) |
it is full range of Piston Crown for the following type :
AAA) YANMAR DIESEL ENGINE
K(D)L, KFL-T, 6MAL-H/T/HT/DT, S165-T/ST/EN,
S185-ST/UT/ET, M200L-UN/SN/EN/M220L-UN/SN/EN / N 330
BBB) DAIHATSU DIESEL ENGINE
PS22/26/ DS18(A)/ DS(B)22/
DL20/22/28/ DK20 / DK 28
CCC) NIIGATA DIESEL ENGINE
6L(M)25BX/6M28AFTE/BX/6M31X/EZ/EX/ 31AFTE /34AGT
DDD) AKASAKA
AH30/AH38/ AH40/D/F/ A31/34/37/41/ DM28/30/33/36/38/40(A)K/ DM46/ UEC37H-HB/ UEC 37/88H
UEC 37LA/ UEC45LA/ UEC52LA/ UEC52HA/ UEC60HA/ UEC60LS/ UEC45HA/115 ALL UET TYPE
EEE) MITSUBISHI (KOBE AND AKASAKA )
45/75C/ 45/80D/ 52/90D/ 52/105D.E/
UEC37H-IIB/ UET37/88HA/UEC45HA.LA/ UEC52HA.LA/ S6B/
ETC
FFF) HANSHIN
6LU(D)26/ 6LU(N)28A/ 6LU(D)32/6LU(D)35/ 6LU(S)38/ 40 / 6LU40/ 6LU46A/ 6LU50A/
6EL30/ EL(S)32 /6EL(S)35/ 6EL38/ 6EL40/ 6EL(S)44/50A/
GGG) MAN B&W
S35MC/L35MCE/L50MCE/ L60MCE/ 40/54A
HHH) MITSUBISHI PURIFIER
SJ700~SJ1800/SJ 2000
III)SULZER
RND 68 RND 76 RD 44
JJJ) MAKITA
GSLH – 633 637 KSLH -633 637
Kkk) PIELSTICK
PC 2-5 PC 2-6
Piston Crown
Piston Crown,Diesel Engine Piston Crown,Marine Engine Piston Crown
ZhouShan HeCheng Machinery Co., LTD. , http://www.hcmarineparts.com