Heavy-flotation production process in Japan

The picture below shows the heavy-flotation production process of Japan's Yimumuka Plant. Single mercury type ore, mercury minerals have cinnabar and natural mercury, and its output ratio is 3:7. There are a lot of associated minerals pyrite. The gangue has quartz , calcite and clay . The chemical composition (%) of the ore is SiO ₂ 52.94, Al ₂ O ₃ 19.71, CaO 8.47, Fe ₂ O ₃ 5.51, S 4.09, MgO 3.30, Hg 0.16. Flotation gives the ore particle size of 53.8%-200 mesh, and the pulp concentration is 15%~25%. The dosage (g/t) of the agent is: pentyl potassium xanthate 130, cyanide 40, and alcohol 110.

Figure Japan's production process chart

Road Sweeper Truck mainly used to clean gravel, sand, mud, dust and other road waste.. And it is also called Road Sweeper Machine, Sweeper loader. Unique side brush design, increase the cleaning width, improve the cleaning efficiency, and clean the garbage along the stone edge. The side brush and the main brush can be operated independently and are detachable. Using independent skeleton structure processing and welding, to prevent the deformation of the cleaner and open the welding, and extend the service life of the equipment. The garbage bin adopts the design principle of storage and collection before cleaning, which greatly improves the use rate of garbage bins.

The motor and the brushing spindle are connected by a direct connection and a flexible connection to reduce the different shaft problems of the motor and the spindle and prolong the service life of the motor.

Road Sweeper Truck

Road Sweeper Truck,Road Sweeper Machine,Cleaner Truck Road Sweeper,Road Cleaning Truck

SINOMICC INTERNATIONAL , https://www.rockstartyre.com