Cheng Li refrigerated compartment body maintenance method

In order to prevent summer high-temperature solar ultraviolet rays from damage to the paint surface of refrigerated trucks, Cheng Li Special-purpose Steam shall specifically tell the crying and weeping refrigerated vehicles to pay more attention to car care:

1, First of all, summer should try to park the car in a cool place.

2, The shellac, dust, etc., that are often attached to the surface of the paint must be promptly cleaned.

3 , Before cleaning, must first cut off the power.

4, Use a soft cotton cloth with a small amount of non-corrosive detergent in the warm water to scrub the inside and outside surfaces of the refrigerator . After cleaning, dry it with a dry cloth . Do not use organic solvents , hot water , detergent, etc. to clean the harmful substances in the refrigerator.

5, Shall from time to time remove dust from the condenser and a compressor, debris with a soft brush, to maintain good cooling effect.

6, Always scrub with warm water seal, the sealing strip remains flexible to extend its life.

7, Car washing and waxing are often required during the summer.

8 , if you still want to give your car paint to do more thorough protection work, it is recommended to do a good job to seal their own cars. The refrigerated car seal glaze can form a protective glaze on the surface of the refrigerated truck to prevent the refrigerated truck paint from being directly exposed to the outside and has the effect of resisting ultraviolet rays.

Company Address: Chengli Automobile Industrial Park, Suizhou City, Hubei Province

Corporate website: http://

Sales Representative: Manager Chen 15335798333   

Office: 0722-3825019

Fax: 0722-3324444

As a key part of Covering Machine ,the Covering Spindle is used for winding the chemical fibers as true silk,polyester filament,cotton and wool fibers on the spandex core,can suit with Weifeng machine, Jinggong machine, Nanfeng machine,Guoxing machine, Menegatto or OMM type M4 and M5.

1.Good quality Ball Bearing can be choosed: WIB,made in SWIZZ, Bardun, NSK.

2.Spindle have straight and cone charp, running speed have high speed 15,000-18,000rpm and normally speed 12,000-14,000rpm.

3.Our spindle has the advantage of small vibration, low noise,good balance, convenient maintenance long service life.

Spindle For Covering Machine

Spindle for Covering Machine,Spindle Spool,Spool Chair,Spool Bed

Xinchang Jinxing Machinery , http://www.xcjinxing.com