Belt conveyor design selection calculation (2)
(2) Lower branch (return branch) running tension:
In the formula (upward), H takes a positive value, and vice versa.
C Tight edge tension and loose edge tension calculation
D The minimum allowable tension calculation according to the conveyor belt sag (1) The upper branch allows the minimum tension:
F sc =6.25ι c (W m +W 1 )g (24)
(2) The lower branch allows for minimum tension:
F=6.25ι r W 1 g (25)
E Four-point tension calculation of the conveyor belt When the side profile of the belt conveyor is relatively simple, the calculation of the belt conveyor head and the tail cylinder and the four-point tension T 1 to T 1 (Fig. 1) can be calculated. In order to obtain the maximum tension, minimum tension, tension, etc. of the conveyor belt; when the side profile of the belt conveyor is complicated, especially when the upper and lower undulations are up, it should be calculated point by point (consistent with the four-point tension calculation principle) The tension S 1 to S 2m (Fig. 1f) can obtain the maximum tension, the minimum tension, the tension and the like.
[next]
a Calculation of tension when the effective tension F p ≥ 0 (1) When the head is driven (single roller or double roller):
The following formula applies to the calculation of the down-conveyor tension for parallel, up, and F p ≥ 0 (ω = 0.022):
T 1 =F 1 =F 2 +F p =T 2 +F p (26b)
T 3 =T 4 =T 2 +F r (26c)
When T 4 <F sc or F sr :
T 3 =T 4 =F sc or F sr (26d)
T 2 =T 3 -F r (26e)
T 1 =T 2 +F p (26f)
Tension distribution, as shown in Figure 1a.
(2) When the tail drive (single drum or double drum):
The following formula applies to the calculation of the down-conveyor tension for parallel, up, and F p ≥ 0 (ω = 0.022):
T 1 =F 1 =F 2 +F p =T 2 +F p (27b)
T 3 =T 4 =T 1 -F r (27c)
When T 2 <F sc or F sr :
T 2 =T sc or F sr (27d)
T 1 =T 2 +F p (27e)
T 3 =T 4 =T 1 -F r (27f)
Tension profile, as shown in Figure 1b.
(3) When the head and tail drive (2 sets of rollers, which can be composed of 2, 3 or 4 rollers):
The head roller has a total wrap angle of θ 1 , a friction coefficient of μ 1 , a drive motor power of M 1 , a tail drum total wrap angle of θ 2 , a friction coefficient of μ 2 , and a drive motor power of M 2 .
The following formula applies to the calculation of the tension of the downstream belt conveyor with dry parallel, up and F p ≥ 0 (ω = 0.022):
F 1 =F 21 +F p1 (28f)
F 12 =F 22 +F p2 (28g)
When F 21 <F 12 -F r :
T 4 =F 22 (28h)
T 3 =T 4 +F p2 (28i)
T 2 =T 3 -F r (28j)
T1=T2+F p1 (28k)
When F 21 >F 12 -F r :
T 2 =F 21 (28l)
T 1 =T 2 +F p1 (28m)
T 3 =T 2 +F r (28n)
T 4 =T 3 -F p2 (28o)
Tension distribution, as shown in Figure 1c.
Industry OTR Solid Tire Suitable for Loaders Truck, Dumpers Truck
Product attributes:
1. High loading, low rolling resistance, lower energy consumption, higher wear and antipuncture
resistance, no exploding, lower cost of maintenance, such kind of tire is widely used on the special
vehicle of port, mine metallurgical industry.
2. The resilient tires are compatible with the standard rims of pneumatic tires, so they can replace
pneumatic tires without changing rims. It has such advantages like longer wear, long life, low rolling
resistance, low energy consumption, puncture-free etc.
3. It is the ideal replacement of pneumatic tire in the fields of low speed, high load circumstances.
Cushion rubber center provides good shock absorption, reducing damage and improves ride. High
strength base rubber and steel reinforce base provides absolute rim adherence.
4. Tree compound construction, a new design popular in EUROPE and America.5. Wear resistant tread compound.
6. Resilient center compound.
7. Super base compound.
8. Steel ring reinforced.
We manufacture and sell solid tires, as well as conducts research and development of the latest
technology of solid tires.
Our company products conform to standards such as Chinese GB, US TRA, European ETRTO,
and Japanese JATMA and have passed the ISO9001:2008 quality certification.
Our technical team has demonstrated their capability of delivering the best tire solution and products
to clients with different working environments, ranging from sea ports, supply chain centers, mines,
aviation grounds, high temperature operations, refuse disposal centers, railway constructions, tunnel
constructions, and heavy goods transportations to factories that require a super clean working condition.
Our solid tyres have been exported to North America, Europe, Northeast Asia, Oceania, and Africa.Our company also delivers OEM products to many prominent enterprises, such as Sany Heavy
Industry, Carrie Heavy Industry, XCMG, Liugong Machinery, Maximal, Tailift MCC Baosteel and
Haipeng Indestry etc.
Correlative sizes:
8.25-20, 10.00-20, 10×16.5, 12.00-20, 12.00-24, 12×16.5, 14.00-20, 14.00-24, 16.00-25, 17.5-25,
18.00-25, 20.5-25, 23.5-25, 26.5-25, 29.5-25, 38.5×14-20, 385/65-24(385/65-22.5),
445/65-24(445/ 65-22.5), 900-16, 900-20, 1100-20
Main Sizes and Parameters:
Otr Solid Tires,Radial Otr Tires,Otr Graders Solid Tires,Industrial Otr Solid Tire
SINOMICC INTERNATIONAL , https://www.rockstartyre.com