Avoid maintenance tips for "burner oil" of aerial vehicles

Engine oil is crucial to the protection of high-altitude vehicle engines. There are many causes of “burning oil”. Engine oil is volatile, engine running-in, engine type, etc. may cause the engine to “burn engine oil”, but by strengthening the operation of high-altitude vehicles. The daily maintenance can reduce and avoid this risk. Then, what maintenance tips should be paid attention to?

1. To develop a good inspection habits. According to different conditions of use, in the regular routine, daily maintenance regularly check the height of the work vehicle oil, such as the oil level exceeds the lower limit, should be added in a timely manner. Useful life and mileage longer and often For vehicles used in harsh conditions, the frequency of inspections should be increased accordingly. In this way, even if the vehicle has “burned oil” conditions, “early detection and early treatment” can be achieved, reducing maintenance costs.

2. Select better-quality fuel oil. After the additives in the fuel are oxidized, a gel-like substance is formed. After the fuel nozzle enters the combustion chamber and burns, it will be in the intake valve, piston top, piston ring groove, combustion chamber, and spark plug. The formation of carbon deposits in other parts will aggravate the aging of these parts and cause "burner oil." Therefore, the use of better-quality fuel can reduce the phenomenon of "burning oil" in aerial vehicles.

3. Regularly maintain the vehicle. The fuel maintenance cycle is based on the normal driving conditions of the fuel. The vehicle with relatively poor service conditions should be shortened according to the actual situation and the prescribed number of kilometers.

4. Choose good quality oil. The engine oil should choose the famous brand as far as possible. If the conditions permit, the effect of choosing full synthetic oil is better. The good quality oil not only has better cleaning performance, but also can minimize the sludge and carbon deposition. The parts wear out, thereby reducing the occurrence of “burning oil” and at the same time, it also has better stability, so that the oil maintains an appropriate viscosity level at the high temperature and high rotation speed of the high-altitude truck engine, ensuring effective sealing and reducing oil consumption.

Replacement parts for Case-IH Cornhead & Combine :

Sprocket, oil seal, chain, lower idler support, ear saver, point for center snout, stalk roll knife, idler, finger, rotor bar, bolts and nuts, hub, sheet metal flooring kit, finger guide, etc.

Case-IH Cornhead & Combine Parts

Case IH Combine Parts, Case IH CornHead Parts, Replacement Parts for Case-IH Combine and Cornhead

NingBo Greenly Machinery Co.,LTD , http://www.greenlyagparts.com